Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Electric Cable Compounds, Inc., 108 Rado Drive, NAUGATUCK, CONNECTICUT 06770
on — Heat (thermal) burns, unspecified, affecting the multiple body parts, n.e.c..
Final narrative
An employee was working in the extruder area preforming purging activities when the employee became injured by the material compound and sustained burns to the left side of the face and right wrist. The employee was hospitalized.
HospitalizedMultiple body parts, n.e.c.Chemicals and chemical products, unspecified
More severe injuries at Electric Cable Compounds, Inc.
On August 30, 2017, an employee was cleaning out/blowing down a rotary airlock when the airlock caught and amputated his left middle and index fingers. The airlock was not locked/tagged out at the time of the incident.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 325991)
An employee was working to unclog a feeder that feeds raw material into an extruder to make plastic/polymer. The slide gate closed on his right hand, amputating three fingers between the first and second knuckles as well as cutting the thumb tip.
An employee was operating an overhead crane and using a hoist to lower a metal tipper bin. The tipper lowered onto their right hand, crushing their right thumb and resulting in a fingertip amputation.
An employee was unclogging a granulator when the rotor pulled his fingers in. His left index, middle, and ring fingers, as well as his right thumb, index, middle, and ring fingers were amputated. The employee was hospitalized. The machine was not guarded at the time.
On March 3, 2025, two employees were working on a blender. The injured employee was removing contaminated pellets from the blender. Another employee went to elevate a tilter that was feeding the blender when the blender auger activated and crushed the injured employee's left leg. The employee's leg was medically amputated 4" - 6" below the knee. The machine was guarded at the time.
An employee was performing maintenance on a pelletizer. When they rotated the drum, their left index finger became caught between the pelletizer blades and the bed, resulting in a fingertip amputation.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.