BAY SAINT LOUIS, MISSISSIPPI—
DAK Americas Mississippi, Inc.
Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury at DAK Americas Mississippi, Inc., 3303 Pot & Harbor Dr., BAY SAINT LOUIS, MISSISSIPPI 39520 on — Second degree heat (thermal) burns, affecting the face, unspecified.
Final narrative
An employee was assisting in the removal of a monomer pump bowl when he was sprayed with hot monomer (a slurry of PET plastic) and sustained a second degree burn to the lower face.
Similar incidents · Same event type
BAY CITY, TEXAS—
OQ Chemicals
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
HAUPPAUGE, NEW YORK—
Husbe Zoaq
An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.
FORT WORTH, TEXAS—
The Cumberland Rest Inc. dba Trinity Terrace
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
SAN ANTONIO, TEXAS—
Mueller & Wilson Inc
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
MADILL, OKLAHOMA—
Oklahoma Steel & Wire Co., LLC
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 325211)
READING, PENNSYLVANIA—
General Polymeric Corporation
An employee was monitoring a rotary press when his left hand became caught in the machinery. The employee's left middle finger was amputated at the distal interphalangeal joint.
HOLDEN, LOUISIANA—
MCM Plastics, Inc.
An employee was sweeping in an area with powdered PVC on the floor and began having difficulty breathing and coughing up blood, The employee was hospitalized for inhalation of PVC.
BAXLEY, GEORGIA—
Lawter Inc.
An employee was working on a pastillator machine, which processes resin-based materials into solid pastilles. His right hand became caught between the feed roller (operating at approximately 350 F) and the cooling belt. The employee s glove and shirt sleeve adhered to his arm due to the heat. The employee sustained third-degree burns to his right hand and forearm, requiring hospitalization and surgery.
PHILADELPHIA, PENNSYLVANIA—
AdvanSix, Inc.
An employee was troubleshooting a leak on a low pressure (less than 50 PSI) condensate line in the oxidation area of the plant. He was working to remove insulation around a valve when either the valve or the line failed, and hot condensate contacted his right arm, right abdomen area, and the front of both legs, resulting in second- and third-degree burns.
MOUNT PLEASANT, PENNSYLVANIA—
Rochling Machined Plastics
An employee was replacing a fan on a cooling unit. As he went to adjust a pump, the unit caught his right hand and the fan blades severely lacerated his index finger. He underwent a medical amputation to the finger.
More severe injuries in MISSISSIPPI
LAUREL, MISSISSIPPI—
Howard Industries Inc.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
VICKSBURG, MISSISSIPPI—
Hobby Lobby Stores, Inc.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
WEST POINT, MISSISSIPPI—
Owl's Head Alloys West Point
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
PASCAGOULA, MISSISSIPPI—
Ingalls Shipbuilding
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
COLUMBUS, MISSISSIPPI—
Heavy Equipment Movers and Installation, LLC
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.