Federal OSHA recorded a severe workplace injury
at DRUMCO OF ARKANSAS, INC., 142 TECHNOLOGY DRIVE, ARKADELPHIA, ARKANSAS 71923
on — Fractures, affecting the ankle(s).
Final narrative
Two temporary employees working in the forming area were involved in a physical altercation. During the altercation the two employees grabbed one another and fell to the ground. One employee fell on the other employee. The employee that was fallen on sustained a fractured right ankle.
HospitalizedAnkle(s)Co-worker or work associate of injured or ill worker, unspecified
An employee was on top of a shot blaster pushing down metal shots from a sight glass into the auger when the auger caught the employee's hand and pulled his arm into the shot blaster. He sustained vascular damage in his arm and was hospitalized.
A store employee was pushed by a shoplifter into the frame of the entrance door to the store. The employee's head struck the doorframe resulting in head injuries and contusions on her hand and arm. The employee was hospitalized.
An employee was making patient rounds at the hospital and stopped to talk with the charge nurse in front of the nurse's station. A patient reached over the nurse's station, grabbed a metal three-hole paper punch from over the desk, and proceeded to attack the employee with it. The employee sustained lacerations to the head and face, a fractured forearm, and a fractured little finger.
A teacher's assistant was attending to a student in the quiet room when they were pushed by another student. The employee fell to the floor and sustained a left hip fracture.
More severe injuries in this industry (NAICS 811310)
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.