WICHITA, KANSAS—
Jack Engle & Co.
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Jack Engle & Co., 4330 South May St., WICHITA, KANSAS 67209 on — Amputations, affecting the fingertip(s).
Final narrative
A temporary employee was operating a forklift and dumping a tilt hopper full of aluminum turnings. When the hopper tilted forward, the employee's fingers were pinched between a fork tine and the hopper. Three fingertips on the left hand were amputated.
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 325991)
FOLEY, ALABAMA—
Ascend Performance Materials Operations LLC
An employee was working to unclog a feeder that feeds raw material into an extruder to make plastic/polymer. The slide gate closed on his right hand, amputating three fingers between the first and second knuckles as well as cutting the thumb tip.
WADSWORTH, OHIO—
Radici Plastics USA Inc.
An employee was operating an overhead crane and using a hoist to lower a metal tipper bin. The tipper lowered onto their right hand, crushing their right thumb and resulting in a fingertip amputation.
AKRON, OHIO—
Advanced Cryogenic Enterprises, LLC
An employee was unclogging a granulator when the rotor pulled his fingers in. His left index, middle, and ring fingers, as well as his right thumb, index, middle, and ring fingers were amputated. The employee was hospitalized. The machine was not guarded at the time.
ASHLAND, WISCONSIN—
Deltco of Wisconsin, Inc.
On March 3, 2025, two employees were working on a blender. The injured employee was removing contaminated pellets from the blender. Another employee went to elevate a tilter that was feeding the blender when the blender auger activated and crushed the injured employee's left leg. The employee's leg was medically amputated 4" - 6" below the knee. The machine was guarded at the time.
FORT WORTH, TEXAS—
RTP COMPANY
An employee was performing maintenance on a pelletizer. When they rotated the drum, their left index finger became caught between the pelletizer blades and the bed, resulting in a fingertip amputation.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.