WILD ROSE, WISCONSIN—
Shelmet Precision Casting Co.
Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Shelmet Precision Casting Co., 550 County Highway H, WILD ROSE, WISCONSIN 54984 on — Heat (thermal) burns, unspecified, affecting the hand(s), unspecified.
Watch Shelmet Precision Casting Co. — free
Get an email when a new federal OSHA severe-injury report for Shelmet Precision Casting Co. is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was using a half-gallon metal transfer ladle. After she finished the transfer process, the kettle sat on a hot plate. She was clearing a wax chunk from its inside lip when the chunk fell into the kettle and splashed hot wax on her hand. She suffered burns to both hands (mainly the back of the right hand) and possibly on the back of her neck.
Similar incidents · Same event type
BAY CITY, TEXAS—
OQ Chemicals
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
HAUPPAUGE, NEW YORK—
Husbe Zoaq
An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.
FORT WORTH, TEXAS—
The Cumberland Rest Inc. dba Trinity Terrace
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
SAN ANTONIO, TEXAS—
Mueller & Wilson Inc
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
MADILL, OKLAHOMA—
Oklahoma Steel & Wire Co., LLC
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 331512)
HARTFORD, WISCONSIN—
Signicast LLC
An employee was using a grinding machine with a foot pedal. She was loading a part into the grinder when her right hand got caught in the grinder. She then used her left hand to pull out her right hand. The employee suffered a laceration to the back of two fingers on her left hand and her left forearm, as well as partial amputations to two fingers on her right hand.
BLACKWELL, OKLAHOMA—
Oklahoma Investment Casting Company
An employee was looking into a furnace to check for parts. When the furnace closed, the employee's right little finger was caught by a piece of metal, resulting in a partial amputation.
MELBOURNE, FLORIDA—
Stephens Pipe and Steel, LLC
A forklift was loading bundles of pipe onto a trailer. One of the bundles weighing approximately 1,200 pounds dislodged and fell off the trailer, striking two employees that were standing on the back side of the trailer. Both employees were injured. One employee was struck in the legs, sustaining fractures in both legs. His left leg had to be amputated above the knee on 5/2/2025. The second employee sustained multiple injuries including a broken pelvis and kidney damage.
WAUKESHA, WISCONSIN—
Accurate Specialties Inc
An employee was putting a metal part into a CNC lathe when the part fell on their right fingers. The employee sustained a fracture and laceration to their middle finger, and an amputation of their ring finger.
NEWPORT, NEW HAMPSHIRE—
Sturm, Ruger, & Company, Inc.
An employee was dislodging a part that was stuck in the shot blasting machine when the part released and shifted, catching the employee's left middle finger between the part and the belt of the machine. The employee pulled his hand away and sustained a fingertip amputation.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.