HARTFORD, WISCONSIN—
Signicast LLC
Caught, entangled in running powered equipment normal operation · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Signicast LLC, 1800 Innovation way, HARTFORD, WISCONSIN 53027 on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was using a grinding machine with a foot pedal. She was loading a part into the grinder when her right hand got caught in the grinder. She then used her left hand to pull out her right hand. The employee suffered a laceration to the back of two fingers on her left hand and her left forearm, as well as partial amputations to two fingers on her right hand.
More severe injuries at Signicast LLC
HARTFORD, WISCONSIN—
Signicast LLC
An employee was unjamming a parts elevator when his arm became stuck in the parts elevator. The employee was hospitalized with a broken arm.
HUTCHINS, TEXAS—
Signicast, LLC
An employee was putting metal in a pot to melt. The top of the metal started to solidify; the employee was using a rebar to poke a hole in the top to mix the metal when some of the metal splashed onto coils outside the pot. This caused steam to build up and pressurize the metal, which expanded and flew out of the pot. The employee fell while trying to escape the splash, landing on metal that had hit the floor. The employee suffered second-degree burns to the hands, left knee, and stomach.
HARTFORD, WISCONSIN—
Signicast, LLC
An employee was using a hoist to transfer a heat treat basket which was approximately 3 ft. by 4 ft. long from a staging rack to a conveyor. The basket was loaded with castings that go into the heat treat operation. The employee detached the hoist and noticed the basket wasn't sitting flat on the cart. As she manipulated the basket her right middle finger was pinched between the basket and the conveyor resulting in a partial amputation of the fingertip with loss of fingernail and subsequent revision of the tip of the finger. Stitches were used to close the wound. No surgery was required.
View Signicast LLC's full OSHA safety record →
Similar incidents · Same event type
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
FRANKLIN PARK, ILLINOIS—
Olympia Food Industries Inc.
An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.
TEXARKANA, TEXAS—
Day & Zimmermann Lone Star LLC
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
PASCAGOULA, MISSISSIPPI—
Ingalls Shipbuilding
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
CLEVELAND, OHIO—
Galaxy Balloons Inc.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 331512)
BLACKWELL, OKLAHOMA—
Oklahoma Investment Casting Company
An employee was looking into a furnace to check for parts. When the furnace closed, the employee's right little finger was caught by a piece of metal, resulting in a partial amputation.
MELBOURNE, FLORIDA—
Stephens Pipe and Steel, LLC
A forklift was loading bundles of pipe onto a trailer. One of the bundles weighing approximately 1,200 pounds dislodged and fell off the trailer, striking two employees that were standing on the back side of the trailer. Both employees were injured. One employee was struck in the legs, sustaining fractures in both legs. His left leg had to be amputated above the knee on 5/2/2025. The second employee sustained multiple injuries including a broken pelvis and kidney damage.
WAUKESHA, WISCONSIN—
Accurate Specialties Inc
An employee was putting a metal part into a CNC lathe when the part fell on their right fingers. The employee sustained a fracture and laceration to their middle finger, and an amputation of their ring finger.
NEWPORT, NEW HAMPSHIRE—
Sturm, Ruger, & Company, Inc.
An employee was dislodging a part that was stuck in the shot blasting machine when the part released and shifted, catching the employee's left middle finger between the part and the belt of the machine. The employee pulled his hand away and sustained a fingertip amputation.
REEDSBURG, WISCONSIN—
Grede LLC
An employee was replacing a leaking hydraulic hose on an H-press. When the hydraulic hose was removed, the ram dropped and crushed the employee's small right toe, amputating it. The machine was locked out at the time.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.