Caught between rolling powered vehicle and other object · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at East Penn Manufacturing, 50 Jefferson Street, TOPTON, PENNSYLVANIA 19562
on — Fractures, affecting the foot (feet) and ankle(s).
Final narrative
An employee had been preparing and moving pallets using a powered industrial truck. As the employee stepped off the truck, it crushed the employee's ankle and foot against a pallet, breaking the ankle and foot.
HospitalizedFoot (feet) and ankle(s)Forklift, order picker, platform truck-powered
An employee was standing beside a conveyor gate when another employee closed the gate latch on the first employee's left index finger, resulting in a fingertip amputation.
On December 13, 2023, an employee was operating a forklift. When they stepped off the forklift, it crushed their left foot between the lift and a racking system. The employee suffered a foot fracture that required hospitalization.
An employee was maneuvering a motorized pallet jack while standing in front of it. He became pinned between the pallet jack and a steel rack cross-beam, resulting in a contusion to his chest/back and a fractured rib.
An employee was stacking empty drums into a trailer. The employee then exited the trailer, using the forks of a forklift as a step. The forklift's parking brake failed, causing the forklift to move forward and pin the employee's right leg between the forklift and the trailer. The employee's right lower leg was crushed, resulting in a fracture and a laceration.
An employee had been spraying weeds behind a school. As he was leaving the field, the employee drove his truck up to the gate, got out, and opened the gate. The truck rolled forward and pinned him against the fence/gate. The gate then gave way and opened from the force of the truck. The employee's left index fingertip got caught in the fence/gate and was amputated.
An employee was using a walk-behind tugger to pull a grinder. The employee's left little finger was pinched between the handle of the tugger and the framework of a staircase. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 335912)
An employee was demonstrating how to disassemble and reassemble a metal filter unit from the cathode powder transfer line. During the open/close operation of an automated valve, the employee s latex glove became caught. The employee sustained a partial amputation to the left index finger.
On March 5, 2025, an employee was pushing an 8-foot x 12-foot x 2-foot electrical panel weighing 3 tons into the electrode room when the panel tipped over, striking his leg. The employee sustained a fractured right femur.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.