East Penn Manufacturing

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

An employee was working near a smelter blast furnace. The employee's foot contacted a semi-solid lead ingot, which burned the employee's left ankle.

An employee had been preparing and moving pallets using a powered industrial truck. As the employee stepped off the truck, it crushed the employee's ankle and foot against a pallet, breaking the ankle and foot.

An employee suffered a leg injury while climbing into a jockey truck. The employee was hospitalized.

An employee was standing beside a conveyor gate when another employee closed the gate latch on the first employee's left index finger, resulting in a fingertip amputation.

An employee was assisting with pipe on a drilling rig. The slips came down and landed on the employee's left foot fracturing four metatarsals.

Two employees were struck by the rotary table of a drilling rig while installing caisson. Employee 1 suffered multiple fractures, internal injuries, and head trauma. Employee 2 suffered multiple fractures, internal injuries, spinal injury, and head trauma.

Employees were felling hazard trees. The injured employee was conducting 'bucking' operations to saw a tree from the road when the tree kicked-back, pinning him against the ground and fracturing his left femur. The employee was hospitalized and required surgery.

An employee was greasing tongs on a work-over rig. The tongs lacerated one of the employee's fingers.

An employee was chaining a vehicle when he had to change tools and the compressor. As the compressor was being charged, the employee stepped near the vehicle to make sure the compressor was attached. Then, he instructed a co-worker to lower the compressor. His right hand was on the compressor and under the chain, causing his ring finger to be crushed.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

An employee was demonstrating how to disassemble and reassemble a metal filter unit from the cathode powder transfer line. During the open/close operation of an automated valve, the employee s latex glove became caught. The employee sustained a partial amputation to the left index finger.

An employee was operating a lift table when his hand was crushed in it.

An employee was placing material on an upright conveyor. The conveyor chain caught his glove, and his middle and ring fingertips were amputated.

On March 5, 2025, an employee was pushing an 8-foot x 12-foot x 2-foot electrical panel weighing 3 tons into the electrode room when the panel tipped over, striking his leg. The employee sustained a fractured right femur.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.