105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

HIRSH INDUSTRIES LLC

Contact with objects and equipment, unspecified · Amputations

Federal OSHA recorded a severe workplace injury at HIRSH INDUSTRIES LLC, 1525 MCKEE ROAD, DOVER, DELAWARE 19904 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..

A Hirsh Industries employee was unloading drawer wraps from a roll form. While removing one drawer wrap, a second drawer wrap was released by the roll form and collided with the one being removed by the employee. This caused the employee's finger to be pinched between the first drawer wrap and a closed gate. The employee's right pinky fingertip was amputated between the fingernail and first knuckle.

Amputation Finger(s), fingernail(s), n.e.c. Nonclassifiable

HIRSH INDUSTRIES LLC

An employee was working on a mobile exit conveyor. He was stacking bottoms. He went to unjam a drawer bottom and his glove got caught in a sprocket, resulting in the amputation of his right middle fingertip and an open displaced fracture of the right ring finger.

View HIRSH INDUSTRIES LLC's full OSHA safety record →

NorAm Drilling Company

An employee was assisting with pipe on a drilling rig. The slips came down and landed on the employee's left foot fracturing four metatarsals.

Stalworth Underground LLC

Two employees were struck by the rotary table of a drilling rig while installing caisson. Employee 1 suffered multiple fractures, internal injuries, and head trauma. Employee 2 suffered multiple fractures, internal injuries, spinal injury, and head trauma.

National Park Service U.S. Department of the Interior

Employees were felling hazard trees. The injured employee was conducting 'bucking' operations to saw a tree from the road when the tree kicked-back, pinning him against the ground and fracturing his left femur. The employee was hospitalized and required surgery.

HT Energy LLC

An employee was greasing tongs on a work-over rig. The tongs lacerated one of the employee's fingers.

TKM BENGARD FARMS, LLC

An employee was chaining a vehicle when he had to change tools and the compressor. As the compressor was being charged, the employee stepped near the vehicle to make sure the compressor was attached. Then, he instructed a co-worker to lower the compressor. His right hand was on the compressor and under the chain, causing his ring finger to be crushed.

ACCO Brands Corporation

An employee was troubleshooting a tabletop binding machine at a customer location when the machine cycled and contacted their left middle finger, resulting in an amputation without bone loss.

Stylex Seating, Inc

An employee was setting up a CNC bender to fabricate a new product prototype. A piece of tubing was drawn back into the bending machine and pulled the employee's right hand in with it. His fingertip was caught between the bending and damping dies and amputated.

IMF Solutions LLC

At 10:15 a.m. on May 17, 2022, an employee was cutting a sheet of half-inch oriented strand board on a table saw when the saw blade contacted the employee's right hand. The employee's index, middle, and ring fingertips were amputated.

ACCO Brands Corporation

An employee was at a customer site to service a paper punch machine. The employee's left ring and little fingertips were in the die area when the machine cycled resulting in amputation of both fingertips.

Innovative Office Productives LLC

An employee was pulling a part out of a reamer machine when his thumb was pulled into the machine, resulting in a partial thumb amputation.

Greggo & Ferrara, Inc.

A flagger was directing traffic flow in a highway work zone. They were standing approximately 1.5 feet behind the shoulder's demarcating line, next to and slightly behind a traffic drum. As they were directing traffic into and out of the driveway of a parking lot, a car attempted to get around a truck and struck the traffic drum, which subsequently struck the employee, who was thrown 15 feet and landed on top of concrete aggregate. The employee suffered pelvic and rib fractures, T10 and L3 vertebra fractures, and internal bleeding.

GREGGO AND FERRARA, INC.

An employee was troubleshooting a power washer in the field. Because there might have been water in its fuel, he brought it back to the shop and drained about a gallon of fuel from the tank into a plastic container. Some of the fuel spilled onto the floor and ignited. The employee was stomping out the fire when he lost his balance and tripped into a stool, which caused the plastic container to spill more fuel onto the fire. The employee's pants and shirt caught on fire, and he fell, abrading his knee while trying to get through the flames. As well as the knee abrasion, he suffered burns to the left leg and left lower quadrant of the torso. He was hospitalized.

CHRISTIANA CARE HEALTH SERVICES, INC.

An employee was backing up a tram (towing powered industrial equipment) to connect it to a trash bin. The employee's left forearm/wrist was caught and crushed between the tram and the bin. The employee was hospitalized.

HomeGoods ,LLC-Newark, DE

An employee went to lift a carton and tripped on a different carton that was on the floor. She fell on the floor in the backroom and sustained a fractured right hip, and abrasions to her arm and knee. The employee was hospitalized and required surgery.

NKS Distributors

An employee was conducting a delivery of beverage products and began having cramps due to dehydration. The employee was hospitalized.