Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Georgia-Pacific Consumer Operations LLC, 437 Old Augusta Road South, RINCON, GEORGIA 31326
on — Second degree heat (thermal) burns, affecting the hand(s), unspecified.
Final narrative
An employee was in the process of unclogging a drain valve on a paper machine stock refiner when the pulp material inside the valve sprayed out. The temperature of the pulp material was approximately 140 to 200 degrees Fahrenheit. The employee sustained second degree burns to his left hand.
HospitalizedHand(s), unspecifiedSource, n.e.c.
More severe injuries at Georgia-Pacific Consumer Operations LLC
The injured employee was engaged in a conversation with other employees. When the injured employee turned to walk away, she tripped over a pallet in the packing area and fell to the floor. The employee sustained a dislocated shoulder and a humeral head fracture.
An employee was operating a paper winder machine in approximately 100-degree heat when they experienced a syncopal episode related to heat exhaustion. The employee was hospitalized.
An employee was operating a forklift when it struck a metal pneumatic pipe on the wall. The employee's right hand was pinched between the forklift's frame and the pipe, and the ring finger was crushed.
An employee was stenciling a roll of toilet paper on a tissue machine and went to remove the roll when his right middle finger was pinched between the pusher and paper, resulting in a fingertip amputation.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 322121)
Tools and parts were being lowered to the ground from an elevated platform in a 5-gallon bucket. The rope being used to lower the bucket failed; the tools and parts fell and lacerated the left forearm and upper left leg of an employee on the ground.
An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.
An employee was working to clear a jam from a paper napkin folder. The ram that advanced the napkins pushed the employee's right arm into the side of the machine, causing several lacerations and a hairline fracture.
An employee was troubleshooting overflowing ink on a printer-slotter machine when their right ring fingertip was caught in a guarded roller, resulting in a partial amputation.
An employee was disconnecting wires in preparation to swap out a refiner motor when they contacted energized equipment and sustained an electrical shock. The employee was hospitalized.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.