C.W. Matthews Contracting Company, Inc.

An employee was winching a shipping container onto his rollback truck using a remote and standing at the rear. The hook on the chain broke and the chain struck his right leg. The employee was hospitalized with a fractured tibia and a laceration.

An employee was loading traffic control barrels into the bed of a truck. The truck moved and the employee lost his balance and fell to the highway asphalt, breaking his wrist.

An employee was dismantling scaffolding from an elevated platform when they lost balance and fell 30 feet through an opening in the planking.

An employee was working on a roof. The employee fell through roof insulation to the ground 25-30 feet below, suffering a broken pelvis and collarbone.

An employee was performing grounds maintenance work. The employee stepped on the edge of a ventilation grate when it flipped over, causing the employee to fall about 30 feet to the ground below. They sustained two heel fractures and a left tibia fracture.

An employee removed a cover from a commercial air conditioning unit to change the filters and laid the cover over the A/C grating located at the bottom of the unit. While changing the filters, the employee stepped on the cover. The cover gave way and the employee fell through the grating, landing approximately 26 feet below on a concrete floor. The employee sustained a broken arm, a broken rib, and a punctured lung.

An employee was dismantling a four-tier scaffolding system. When the employee stepped on a wooden scaffold plank, it failed and the employee fell to the cement floor about 28 feet below. The employee was hospitalized for broken bones and body and head trauma.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.