Entegris, Inc.

An employee was holding a horizontal release bar when his left ring finger was pinched between the bar handle and the floor, resulting in an amputation of the finger to the first knuckle.

An employee was cleaning out a temperature port when heated carbon powder came out and sprayed his face, neck area, and right forearm. He suffered first degree burns to his chin and neck area and second degree burns to his right forearm, requiring hospitalization. Personal protective equipment was not worn at the time of the incident.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was completing setup of a job on a plastic molding machine. The employee was moving a molding tool within the machine using an overhead crane. Their left middle finger was caught between the molding tool and the eye bolt resulting in a fingertip amputation.

An employee was moving a piece of molding equipment on a pallet using a pallet jack. The molding equipment tipped over and pinched the employee's middle finger, resulting in a partial amputation without bone loss.

The employee was working with a plastic lid press machine used for installing lids on cooler products. The employee was clearing a stuck plastic lid and their hand was caught in a pinch point resulting in a partial amputation to a finger.

An employee was unbanding a stack of boxes using a utility knife and lacerated his left forearm.

On 04/25/2019, at approximately 5:27 p.m., an employee was adding rubber to the top of an extruder when the employee's right hand contacted the auger that was below the rollers. All four fingers on the employee's right hand were surgically amputated.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.