Life Enriching Advancing People

An employee was sitting in the cab of the truck while waste oxidizer was being offloaded. The waste reacted with the receiving tank and an explosion occurred in the tank. Fire traveled through the hose to the tanker truck, causing it to explode. The employee jumped from the burning truck and was hospitalized with burns to his face, chest, and arms.

An employee was installing piping and valves for fire protection systems in the vicinity of an electrical meter outside of a new warehouse. The meter exploded, causing burns to the employee's face and arms.

An employee was pouring molten aluminum into a drain pot. The aluminum touched moisture at the bottom of the drain pot and an explosion occurred. The employee sustained burns to their face, hands, and legs.

An employee was operating an oxygen-deficient oven that required manual ignition to make charcoal from wood. As the oven was opened, oxygen was introduced to the environment, resulting in an explosion. The employee sustained head trauma as well as fractures to the arms and legs.

An employee was setting up the electrical parts for a fireworks display. They were inserting an e-match when it generated friction with something else. A 3-inch firework shell ignited, injuring the employee's hand and head.

An employee was driving a forklift when she struck a steel I-beam and struck her head on the steering wheel, resulting in a forehead laceration. The employee was hospitalized and required stitches.

An employee was leaving for lunch. The wheel of her knee scooter struck a divot in the floor which caused her to fall into a metal rack. The employee sustained a broken right shoulder.

An employee was delivering food to families when they were struck by their parked vehicle, resulting in compound leg fracture.

An employee was working on a ladder over a playground stage. The employee fell from the ladder to the stage; he was hospitalized with eight broken ribs and a concussion.

An employee was attacked by a resident at a domestic violence shelter. The employee suffered a closed head injury and bruising to other parts of the body, caused by an impact with a stair railing.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.