105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Electronic Theatre Controls, Inc.

Struck by object falling from vehicle or machinery-other than vehicle part · Fractures

Federal OSHA recorded a severe workplace injury at Electronic Theatre Controls, Inc., 711 ETC Drive, MAZOMANIE, WISCONSIN 53560 on — Fractures, affecting the foot (feet), unspecified.

An employee was pulling a 700- to 800-pound rigging hoist, which was on a four-wheel cart, out of a test fixture. The cart caught the side of the fixture and the hoist slid off it onto the employee's steel-toed boot. The employee suffered a fracture and laceration to the foot, as well as a knee contusion. The employee was hospitalized, requiring surgery.

Hospitalized Foot (feet), unspecified Elevators, hoists, aerial lifts, personnel platforms-except truck-mounted, unspecified

Star Pipe Products LTD

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

KP Building Products, Inc.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

BJ'S WHOLESALE CLUB, INC.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

International Steel and Counterweights LLC

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

Seneca Mechanical, LLC

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

Harco Manufacturing Group, LLC

An employee was operating a proof testing machine by loading it with the product to be tested. The employee's right hand was underneath the door area of the machine and the machine crushed her ring finger and little finger. The injuries resulted in amputation of both fingers up to the knuckle of the hand.

Eaton Cooper B-Line

On March 25, 2025, a maintenance employee was elevated 19 feet in a scissor lift to troubleshoot an overhead shipping door that was not fully closing. The overhead door came down and pushed the aerial lift over. The lift struck the concrete floor of the shipping bay and the employee sustained a compound fracture to his left forearm and a fractured pelvis.

IMS Electrol Manufacturing

An employee was cutting a long piece of wood on a table saw in the maintenance shop. The wood kicked back, causing the employee's left hand to contact the saw blade. The employee sustained an amputation to their thumb tip.

Rockwell Automation, Inc.

An employee was building a magnet channel assembly. The employee's right middle fingertip was caught between two magnet plates, causing the amputation of about 1/4 inch of the fingertip.

Powell Electrical Systems Inc

An employee was bending a part on the brake press when his thumb was pinched between the part and the articulating lift, resulting in a crush injury and amputation to the thumb.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.