Lipman-Texas, LLC

The injured employee was standing on a scaffold with one foot on and one foot off. Another employee was driving an electric pallet jack to drop product on the line. The pallet of product fell from the pallet jack and crushed the injured employee's lower left leg between the pallet and the scaffold.

An employee was pulling some film from a double tray sealer when the cutter blade/heater came down and amputated part of her finger.

An employee was walking back to her workstation. A forklift reversed a short distance, then completed a U-turn and struck her, running over her lower extremities. She was hospitalized with a broken ankle.

An employee was training on a jockey truck. Upon stepping out of the truck, the employee was struck by a rubber tire gantry crane, resulting in amputations of the right leg above the knee and left leg below the knee.

An employee was standing at the rear of a double pallet jack. Another double jack approached, and the employee's lower leg was caught between the two pieces of equipment. He suffered a broken tibia and fibula.

An employee was unloading large material bags on a loading dock. A forklift tine pinned the employee's foot against a pallet, causing the employee to fall and suffer a broken ankle.

An employee was pushing a container when they were struck by a forklift. The employee sustained a left leg fracture.

An employee was on the floor of an aisle wrapping a pallet when an electric pallet jack struck him, resulting in fractured ankles.

An employee was removing a rug entangled in the rear tire of a powered industrial truck (PIT). The PIT was raised and supported by a fork truck jack. The PIT shifted/fell and struck the employee's hand. The employee's index fingertip was amputated and the employee was hospitalized.

On May 14, 2025, at approximately 6:30 AM, a driver was making a delivery at a customer s site when their hand was crushed in a roll-up door. The employee's finger was fractured in three locations and required surgical amputation.

An employee was operating a tractor and utilizing a 2.5-foot kinetic rope and a 1-inch soft shackle to pull another tractor that was stuck in the mud. An additional 30-foot kinetic rope with a soft shackle was hooked up to provide distance from the soft soil. While pulling, the loop end of the terminal shackle on the stuck tractor frayed and released the rope, causing it to recoil back at the pulling tractor. The rope(s) struck the back of the pull tractor, broke the rear window, and struck the employee. The employee was pushed forward into the steering wheel and sustained severe lacerations to the head and a collapsed lung.

An employee was staging products in the back of their box truck to be unloaded. He slipped on a surface in the truck that was wet from rain, and fell out of the back of the truck onto the concrete ground. The employee was hospitalized with a fractured left humerus and required surgery.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.