Tifton Aluminum Extrusions, Inc.

An employee was replacing a gear on a strapping machine conveyor. Bundles (of aluminum) continued to be put on the strapping conveyor while the employee was installing the gear. When a bundle hit the photo eye, the conveyor belt engaged and amputated the employee's right index finger below the second knuckle. The machine was not locked/tagged out at the time.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee measured aluminum material and began to make a cut on a saw. The blade of the saw got caught on an angle and the saw kicked back, amputating the employee's left index finger.

An employee was under a machine, threading aluminum foil through it. The machine's jog button was pressed while the employee's right middle finger was in the roller, and the roller's blade amputated the employee's fingertip.

An employee was helping a maintenance worker install the upper portion of a coil car back into place using a hoist. This part weighs about 1,000 pounds. While seating the upper section onto the mounting bolts, the employees were working to loosen a bolt. The injured employee s right hand was on an impact wrench and his other hand was on the nut. As it was loosening, the upper portion of the coil unit came loose and caught the injured employee s hand against the lower portion of the coil block. The injured employee sustained crushing injuries and an amputation to the middle finger of their left hand.

An employee was setting up a manual kick press when it cycled and amputated the employee's left index fingertip in a pinch point. The pinch point was unguarded at the time.

An employee was holding a door when wind blew it. The door then caught and caused an amputation to the employee's left ring finger.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.