Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Skana Aluminum Co, 2009 Mirro Dr., MANITOWOC, WISCONSIN 54220
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was helping a maintenance worker install the upper portion of a coil car back into place using a hoist. This part weighs about 1,000 pounds. While seating the upper section onto the mounting bolts, the employees were working to loosen a bolt. The injured employee s right hand was on an impact wrench and his other hand was on the nut. As it was loosening, the upper portion of the coil unit came loose and caught the injured employee s hand against the lower portion of the coil block. The injured employee sustained crushing injuries and an amputation to the middle finger of their left hand.
On October 24, 2023, in the hot mill, an employee was assisting a jib crane in moving a 16-foot aluminum ingot. The employee's left hand was caught between the swinging ingot and a crane support, causing a crush injury to his index and middle fingers.
On or about 6/15/15, an employee's hand got pinched between the forklift roll cage and a spider coil, resulting in a pinky fingertip amputation and severe injury to the ring finger of the right hand.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 331319)
An employee measured aluminum material and began to make a cut on a saw. The blade of the saw got caught on an angle and the saw kicked back, amputating the employee's left index finger.
An employee was under a machine, threading aluminum foil through it. The machine's jog button was pressed while the employee's right middle finger was in the roller, and the roller's blade amputated the employee's fingertip.
An employee was trying to lay metal flat on a cooling table from a safety basket. The arm of a tail stretcher machine caught the employee's right leg and broke the thigh.
An employee was setting up a manual kick press when it cycled and amputated the employee's left index fingertip in a pinch point. The pinch point was unguarded at the time.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.