Contact with cold objects or substances · Other burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at FERRELLGAS OPERATING, L.P., 521 N Link Lane, FORT COLLINS, COLORADO 80524
on — Other burns, unspecified, affecting the leg(s), unspecified.
Final narrative
An employee was filling propane cylinders at a commercial landscape business. A propane line disconnected from a cylinder and sprayed liquefied petroleum gas on the employee's right leg, causing severe cold burns to the leg.
An employee was transferring propane from his bobtail truck to a storage tank. As the employee removed the hose, propane shot out and struck him in the mid-section, resulting in propane freeze burns from below the waist to the top of the knees. The employee was hospitalized.
On September 22, 2023, an employee was working on a chiller circuit in a mechanical yard. They sustained second-degree burns after being exposed to refrigerant.
An employee was tightening a fitting for monthly leak detection and repair when liquid natural gas was released, resulting in a cryogenic burn to the right hand.
An employee was performing a pressure check and leak test on a unit when nitrogen gas was released from a valve core removal tool. The nitrogen gas was injected into the employee's right hand, resulting in a burn to the skin, swelling, and pain.
More severe injuries in this industry (NAICS 454310)
An employee was connecting a hose to fill a propane cylinder. The flow of propane was activated when the filler nozzle was partially connected to the cylinder. The nozzle detached from the cylinder valve, causing expanding liquid propane to release through the nozzle. This caused the employee to lose his balance, spin, become entangled in the hose, and fall. He struck his head on the ground and suffered fractures to the temple and cheekbones, a laceration on the forehead, and a brain bleed. The employee was hospitalized.
An employee was filling a motor fuel cylinder from a bobtail. When he opened the handle on the fill nozzle it popped off the filler valve and pushed him back into a rack where he struck his head on a cylinder cage. He sustained a laceration to the back left side of his head. While working to wrestle the hose to the ground, he sustained burns from liquid propane on the right side of his chest and right arm, and sustained minor burns on the left side.
An employee had been refueling empty propane tanks at a site. He drove back to the bulk plant facility and began to feel ill. The employee sustained dehydration due to heat.
An employee was pumping liquid propane from a propane delivery truck to a storage tank. After the transfer was completed, the employee closed the valves and disconnected the transfer hose. During the transfer, the liquid propane auto-refrigerated the riser pipe of the storage tank and that delayed the vaporization of the propane. Upon reaching a higher temperature, liquified propane began rapidly expanding. Liquid propane then discharged from the pipe and contacted the employee, causing cold burns. The employee was hospitalized for second-degree burns to their torso and arms.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.