Direct exposure to electricity, greater than 220 volts · Electrical burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Wallace Sprinkler Inc., Corner of N Ash Ave., LUBBOCK, TEXAS 79403
on — Electrical burns, unspecified, affecting the multiple body parts, unspecified.
Final narrative
An employee was installing sprinklers for landscaping while a dump truck from another company was dumping sand close to a highline wire. The dump truck hit the energized wire, causing it to split and fall on top of the employee. He received an electrical shock and experienced trouble breathing, a sore chest, and burns from the neck down.
HospitalizedMultiple body parts, unspecifiedPower lines, transformers, convertors
An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.
An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.
On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.
An employee was replacing a water check valve at a water plant. He was lifting the valve with two hands when it slipped and contacted his right ring finger, resulting in a partial amputation without bone loss.
The injured employee was assisting with hitching a trailer to a truck. The employee was working to engage the lunette ring on the trailer with the pintle hook on the truck. A mini-excavator began driving onto the rear of the trailer. The added weight caused the rear of the trailer to lower and the front to rise, creating a pinch point between the trailer and the truck. The employee s left thumb was caught in the latch mechanism of the pintle hook. The thumb tip was partially amputated and required surgery.
An employee was spraying down an area by a conveyor he had been using. Moving parts (such as rollers and chains) inside a gear box amputated his right arm at the elbow. The employee was hospitalized.
An employee was adjusting a machine attached to a tractor that rolls out hose into a trench. The machine lowered to the ground and part of it landed on his big toe, amputating it.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.