105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Ingalls Shipbuilding

Contact with hot objects or substances · Third or fourth degree heat (thermal) burns

Federal OSHA recorded a severe workplace injury at Ingalls Shipbuilding, 1000 St Pe' Highway, PASCAGOULA, MISSISSIPPI 39567 on — Third or fourth degree heat (thermal) burns, affecting the back, including spine, spinal cord, unspecified.

An employee was welding on an overhead unit when weld slag dropped onto his clothing, resulting in second and third degree burns to the back.

Hospitalized Back, including spine, spinal cord, unspecified Molten or hot metals, slag

Ingalls Shipbuilding

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

Ingalls Shipbuilding

An employee was descending a stairway when they lost their balance. The employee went to catch themselves and their finger became stuck between two angles and degloved. The employee sustained a medical amputation of their ring finger to the second knuckle.

Ingalls Shipbuilding

An employee was descending a set of inclined ship stairs when she slipped and fell, breaking her right ankle.

Ingalls Shipbuilding

An employee was working on an amphibious assault ship. While exiting the work area, she was climbing over a chill water pump when her leg/foot got caught on the pump. She stumbled and struck her right lower leg/ankle against a steel cutout. The tibia and fibula were fractured where they connect to the right ankle.

Ingalls Shipbuilding

An employee was fitting a T-beam into place with an overhead crane. The T-beam was moved into position under another one. The employee then attempted to lower the hoist and slack the line so the T-beam could rest freely. The crane raised the hoist instead, causing it to snag under the second T-beam, then break loose and strike the employee in the chest and face. The employee suffered fractured ribs, a punctured lung, and a fractured jaw.

View Ingalls Shipbuilding's full OSHA safety record →

OQ Chemicals

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

Husbe Zoaq

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

The Cumberland Rest Inc. dba Trinity Terrace

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

Mueller & Wilson Inc

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

Oklahoma Steel & Wire Co., LLC

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

Ingalls Shipbuilding

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

Electric Boat Corporation

An employee was struck by a plasma cutter and suffered a broken left tibia and fibula. The employee was hospitalized.

Ingalls Shipbuilding, Inc

An employee was preparing to bend a flat bar in a brake press. When the machine was jogged, the stock rotated up and crushed his left middle fingertip against the outer frame of the die. The fingertip was amputated.

All Star Metals, LLC

An employee was cutting metal with a torch. A piece of metal struck the employee's left foot, causing multiple fractures to metatarsal(s). The employee was hospitalized.

Ingalls Shipbuilding, Inc

An employee was descending a ladder carrying a bag of trash. He fell, landed on the ground about 10 feet below, and suffered fractures to his right hip and pelvis.

Howard Industries Inc.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

Hobby Lobby Stores, Inc.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

Owl's Head Alloys West Point

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

Ingalls Shipbuilding

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

Heavy Equipment Movers and Installation, LLC

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.