Menards

An employee was coming down a rolling ladder after stocking shelves when she missed a step and fell to the floor, resulting in a fractured left leg.

An employee was operating a forklift and loading trucks for deliveries when his foot was caught between a bollard and the forklift, resulting in a fracture.

An employee was loading railroad ties for a customer. The employee cut the steel banding on the ties when the ties slid off the forklift and struck his right ankle, resulting in a possible fracture.

An employee was on a rolling staircase, reaching for product on a shelf. He lost his balance and fell about 8 feet to the floor, suffering broken ribs.

An employee was carrying shelving units down a rolling staircase/ladder. She lost her balance and fell to the ground about 5 feet below. She suffered fractures to a leg and an elbow.

An employee was completing a sensor replacement on an air-cooled chiller unit and went to sit on a 5-gallon bucket during a rest break. He experienced sudden stiffness in his left knee, causing him to fall backward and strike his back on a pipe hanger. The employee sustained three broken vertebrae in their lower back.

An employee was sitting at their computer when they fell off their chair, resulting in an S4 compression fracture in their spine.

An employee was sitting on a tall teller chair in a bank drive-through. She leaned forward in the chair when it rolled out from under her. As she fell, a metal footstool that was positioned under the teller station was knocked over. The employee fell on top of the footstool and suffered a puncture wound on the right side of her abdomen from one of the metal legs on the footstool.

An employee fell out of a chair, resulting in an injured ankle that required surgery to repair.

A switchboard operator leaned back in her chair and the chair tipped over. She fell backward and struck her head on the floor, sustaining a subarachnoid bleed.

An employee was backing up an electric pallet jack when it struck a yellow guardrail, pinning his ankle between the pallet jack and the guardrail. The employee suffered a crush injury to his left ankle and shin.

The injured employee was going to use an elevator to go upstairs. The elevator does not have a call button and is operated manually. The employee approached the elevator and used the elevator drop key located in the elevator key box to manually open the door. He then stepped forward into the elevator shaft. The elevator car was on another floor, resulting in the employee falling down the shaft from the first floor to the basement level. The employee was hospitalized with a sprained left hand and bilateral calcaneal fractures.

An employee was aligning a shipping offload conveyor. A component of the machine caught the employee's left middle finger, amputating it above the second knuckle.

An employee was using a torch to burn off liquid petroleum gas from old 100-pound cylinders so they could be recycled. When he went to move a tank, some gas spilled onto the ground, then ignited in a flash that engulfed him. He was burned on the face, hands, and back and was hospitalized.

An employee was escorting a forklift inside a store. While walking backward, the employee tripped on a pallet and fell, suffering a broken hip.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.