Anthony Oak Flooring, Inc.

An employee was laying sticks on the back of a stacker when his finger was caught between a wooden board and metal pipe on the stacker, resulting in the amputation of his left ring finger.

An employee shut off the rough knot saw. When he began to exit the area, his right arm got caught in the blade, amputating his right arm above the wrist.

An employee was standing on a bag of bentonite clay composite when it ignited and the employee's pants leg caught on fire. The employee then went to remove a gasoline can from a dual-axle trailer and sustained burns to his arms, right hand, and the right side of his abdomen.

An employee was burning a brush pile. They poured gasoline on the fire, resulting in burns to his face, arms, and hands.

An employee was helping to put out a fire in a wok when hot cooking oil splashed onto the employee. They sustained second-degree burns.

Two employees were working on an empty above-ground 2,500-barrel crude oil tank. Employee 1 was welding while employee 2 was watching. Employee 1 saw fire behind the welding smoke and notified employee 2. Before they could get off the tank, they both fell in the tank and sustained burns from the fire.

An employee was pressing pyrotechnic composition into pellets using a pressure tablet press. Upon pouring the composition into the small hopper, the composition ignited and produced a flash fire. The employee sustained bilateral burns to the hands and face.

Two employees were investigating smoke originating from a screw at the base of a dry fuel silo. While they were in the ground-level hopper area, a dust explosion occurred. Both employees were burned. One suffered burns to both arms, the face, and the left side of the torso; the other was burned on the face and chest, as well as suffering circumferential burns to the arms.

At 8:00 a.m. on April 22, 2025, an employee was responding to a tracking fault on the bottom head of a six-head sander. While he was straightening the belt, his right hand was pulled in, wedged, and lacerated. He was hospitalized.

An employee slipped and fell while sanding a plenum. The employee landed on their leg and was hospitalized with a broken tibia.

On January 20, 2025, an employee was walking between buildings when they slipped on ice and fell. The employee was hospitalized with fractures to their left tibia and fibula.

An employee was swapping motor leads to change the rotation on a river well pump motor when an arc flash occurred. The employee sustained second-degree burns to their hands and forearms.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.