Struck by running powered equipment during maintenance, cleaning, testing · Cuts, lacerations, punctures without injury to internal structures
At a glance
Federal OSHA recorded a severe workplace injury
at Martco LLC, 1695 Highway 490, CHOPIN, LOUISIANA 71447
on — Cuts, lacerations, punctures without injury to internal structures, affecting the Hand(s), finger(s) unspecified.
Final narrative
At 8:00 a.m. on April 22, 2025, an employee was responding to a tracking fault on the bottom head of a six-head sander. While he was straightening the belt, his right hand was pulled in, wedged, and lacerated. He was hospitalized.
An employee was positioned between a dynamic tamp table and a static structure when his body hit a switch that engaged the tamp table. The employee sustained a fracture to his left pelvic area.
An employee sustained an avulsion fracture to the right small toe when he used a pry bar (7'7" long by 1" square tubing) to apply friction on a belt against a head drum located 8' above the floor. As the pry bar was being removed from the drum, the extended end of the pry bar landed on the employee's right toe.
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 321219)
Two employees were investigating smoke originating from a screw at the base of a dry fuel silo. While they were in the ground-level hopper area, a dust explosion occurred. Both employees were burned. One suffered burns to both arms, the face, and the left side of the torso; the other was burned on the face and chest, as well as suffering circumferential burns to the arms.
On January 20, 2025, an employee was walking between buildings when they slipped on ice and fell. The employee was hospitalized with fractures to their left tibia and fibula.
An employee was swapping motor leads to change the rotation on a river well pump motor when an arc flash occurred. The employee sustained second-degree burns to their hands and forearms.
A maintenance technician was checking the tire pressure on a debarking drum tire. They then initiated the process of adding air into the tire to the specified pounds per square inch. Within seconds, the side wall of the tire ruptured and the maintenance technician sustained broken ribs and a punctured lung.
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.