MANITOWOC, WISCONSIN—
United Piston Ring Inc.
Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at United Piston Ring Inc., 2920 Fairmont Street, MANITOWOC, WISCONSIN 54220 on — Amputations, affecting the upper arm(s).
Final narrative
An employee was changing a filter roll in a filter system using a broomstick. The employee's right arm was caught between the conveyor belt and the platen. The employee sustained an 8" laceration and two broken bones to the right arm, resulting in medical amputation above the elbow.
Similar incidents · Same event type
CULLODEN, WEST VIRGINIA—
Service Wire Company
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
OMAHA, NEBRASKA—
Oriental Trading Company, Inc.
An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.
MCALLEN, TEXAS—
Fox Packaging
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
SALTILLO, MISSISSIPPI—
Ashley Furniture Industries, Inc.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
BEDFORD HEIGHTS, OHIO—
ITW Bedford Wire
An employee's right hand was caught in a wire drawing machine, resulting in amputation.
More severe injuries in this industry (NAICS 336310)
OPELIKA, ALABAMA—
Daewon America, Inc.
An employee was pushing automotive suspension material using a material rack. The material started to shift and caught the employee's right little finger, crushing it. The employee suffered an amputation to the finger. The finger was re-attached.
FOND DU LAC, WISCONSIN—
Mercury Marine
An employee was assembling the gearbox of a lower unit (of a boat motor). They used a handheld electric drill to power the lower unit's gears and inspect the assembly. A gear was out of tolerance, so the employee placed sandpaper in the gearbox to remove any burrs or other material. The employee activated the drill and their left middle finger contacted a nip point between the gears in the unit, resulting in a fingertip amputation.
PERRYVILLE, MISSOURI—
TG Missouri
An employee was reaching for a label and stepped onto a metal piece along rollers and slipped. His leg went down into a gap between the machines and contacted the metal in the gap between the rollers. The employee was hospitalized with the avulsion of skin on his left shin between the ankle and knee, as well as injuries to muscle and ligament.
CARROLLTON, GEORGIA—
Deco Star Industries
On June 10, 2025, an employee was driving a forklift west when they were struck by another forklift driving south. The suffered a puncture wound on the right calf.
WINTERVILLE, GEORGIA—
Nakanishi Manufacturing Corporation
An employee had just moved a large coil of steel next to another coil on a rack using an overhead crane. They unhooked one side of the sling and held onto it with their right middle finger. As they were raising the crane back up, the sling hung up under the coil, building tension; once it released, it quickly jerked the other side of the sling through the coils along with the last joint of the employee's right middle finger. The finger was amputated to that joint.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.