KAWNEER COMPANY, INC.

On May 5, 2025, an employee was loading large, fixed door panels inside a trailer to be delivered to the customer. While positioning a panel, it began to tip to the left and contacted the other panels that were in a row inside the trailer. This caused the 11 panels in the row to fall and pin the employee against the trailer wall. The employee was hospitalized with a laceration to the head and head trauma.

An employee was operating a CNC machine when the part being worked on was ejected from the machine and struck the inside of their right arm. The employee sustained a laceration on their arm.

An employee was operating a forklift with a hopper, dumping aluminum extrusion scrap. The employee had driven into a trailer to dump a load of scrap, then left the forklift cab and released the dump on the hopper so the material could be dumped forward into the trailer. The hopper moved back toward the forklift and caught the employee's left ring finger against the forks. The finger was partially amputated.

A temporary employee was teaching an employee how to clean rollers in the pouring and debridge area of the facility. When they were done cleaning the roller, the employee placed it back into the lathe and used a chuck key to tighten it into place. The temporary employee instructed the other employee to turn on the lathe. As the lathe was being turned on, the temporary employee saw the key was still in the chuck and went to remove it. The employee's finger got caught between the key and the guard resulting in amputation of the left index fingertip.

An employee was maneuvering a steel transport cart next to a similar steel transport cart when his left fifth digit was pinched between the two carts, causing a laceration, fracture, and dislocation to the distal phalange.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was driving a forklift when its right front wheel dropped off a 6-inch curb. The forklift rolled over and trapped him against the concrete surface. He suffered a broken pelvis, ribs, and collarbone, as well as a collapsed lung.

An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.

An employee was performing routine maintenance on a shear machine when the machine's foot pedal was engaged and the blade contacted his right middle finger, resulting in a partial amputation.

An employee was helping to tighten down a metal packaging band for shipping. The metal band broke and struck the employee across their face, cutting their left face/eye area. The employee was hospitalized.

An employee was cutting plywood on a table saw. They went to retrieve a piece of wood and the saw blade partially amputated a fingertip.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.