105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Mississippi Polymers, Inc

Compressed or pinched by shifting objects or equipment · Amputations

Federal OSHA recorded a severe workplace injury at Mississippi Polymers, Inc, 2733 South Harper Road, CORINTH, MISSISSIPPI 38834 on — Amputations, affecting the fingertip(s).

An employee was working on a wind-out and putting a calendar on the roll. While he was guiding the roll holding the bar, the roll slipped and pinched the tip of his left index finger, resulting in a finger amputation.

Amputation Fingertip(s) Reels, rolls, spools, coils, cones

Mississippi Polymers, INC.

An employee was cleaning rollers with a rag when the rag got caught in the rollers and pulled his arm in, resulting in multiple fractures. The machine was not locked out at the time.

Mississippi Polymers, Inc.

An employee was trying to unclog an FCM machine when his hand was caught between the hydraulic jack and the machine. His left thumb was broken.

Mississippi Polymers, INC.

An employee was cleaning a blender with the air-actuated discharge valve open for cleaning inside the blender. The employee's right hand was inside the opening with a rag. The switch that opened and closed the valve was bumped, and the valve gate closed on her right hand. The injury was just above the knuckles. She was hospitalized for surgery.

View Mississippi Polymers, Inc's full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

NIKE AIRMI

An employee was attempting to remove a TPU sheet from a TPU machine when her thumb was caught between two rollers, resulting in a thumb tip amputation.

Evolutions Brands, Inc

An employee was operating a leather machine to trim excess leather off a shoe when the machine became jammed. While the employee was trying to remove the leather, the machine gears struck the employee's hand, resulting in an amputation of the right index finger.

Sonoco Flexible Products

An employee was using a hoist and sling to move a shaft. After the employee hooked the sling to the shaft, the up button was pressed on the hoist's wireless remote. The strap then tightened on the shaft and the employee's right hand was caught between the two, causing an amputation of the right middle fingertip above the knuckle.

NIKE AIR MANUFACTURING INNOVATION

An employee was attempting to clear out bridged material from a support hopper in the compounding process. The employee opened the bottom of the hopper to insert a tool to break up the material. Upon clearing the jam, the slide gate closed while his hand was in the zone. The employee's middle fingertip on the right hand was pinched by the slide gate as he pulled his hand out, resulting in a fingertip amputation.

NIKE AIR MANUFACTURING INNOVATION

An employee was sitting on a thermoforming machine's exit tray when it collapsed and she fell to the floor, breaking her ankle.

Howard Industries Inc.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

Hobby Lobby Stores, Inc.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

Owl's Head Alloys West Point

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

Ingalls Shipbuilding

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

Heavy Equipment Movers and Installation, LLC

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.