Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Trane US, Inc., 6200 Troup Hwy, TYLER, TEXAS 75707
on — Amputations, affecting the fingertip(s).
Watch Trane US, Inc. — freeGet an email when a new federal OSHA severe-injury report for Trane US, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was troubleshooting a corner post part stacker to determine if there were any faulty sensors. The machine cycled and pushed a slide mechanism into the employee's hand, amputating the tip of the ring finger at the first joint.
An employee was moving from an extension ladder to a mezzanine to inspect duct work. The employee fell from the ladder to the hardwood floor 10 to 12 feet below, suffering a broken neck vertebra, a broken left humerus, a broken right wrist, and multiple broken ribs.
An employee was changing a fan motor on an air conditioning unit. The employee fell from the top of the AC unit to the rooftop about 8 feet below, suffering broken ribs and a broken right collarbone.
Two employees were removing the condenser head of a chiller. While the head was suspended, it pivoted, causing one employee's finger to be caught between a bolt and a hole. The finger was amputated.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333415)
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was observing expansion rods on a coil expander going into a coil to ensure copper stubs weren't being bent. His left hand was caught between the locking block and locking block clamp on the power press machine, resulting in partial amputation of his left little finger from the distal interphalangeal joint.
An employee was setting up a press brake and rolling over a die when the tip of their left little finger was caught between the horizontal working surface of the press brake and die. The employee sustained partial amputation of their fingertip.
An employee was working to remove an access panel to begin performing maintenance on a machine. The set pins on the bottom of the panel were broken. The bottom kicked out and fell, striking the employee's left foot and resulting in a fracture to the big toe.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.