PAC Worldwide Corporation

A maintenance employee was repairing the labeler on the line when it fell on their head, resulting in a broken jaw.

On September 23, 2024, an employee was filling a hot glue tank with glue pellets when he sustained second- and third-degree burns to four fingers on his right hand. The employee was not wearing personal protective equipment at the time.

An employee was rewebbing a machine when their right little finger was caught in a nip roller and amputated. The machine was not locked out at the time.

An employee was adjusting a film roller in a vacuum forming machine. The employee was pulled into the machine, and all four fingers and part of the thumb on the employee's left hand were amputated.

On June 10, 2018, an employee was clearing a jam in the polybag machine. The machine cycled and the heated pins used to punch holes into the plastic bags amputated the tip of the employee's left index finger.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was walking behind the rewind coding machine while on his phone. He rested his left wrist on top of the slitter bar and his finger came in contact with the roller, resulting in amputation.

The injured employee was assisting the bander operator with dressing units with dunnage. A unit became stuck on the conveyor. The injured employee was pushing the unit on the conveyor when a conveyor roller pulled his shoe in-between the rollers. The employee sustained crushing injuries to their left foot/toes.

An employee was inspecting and adjusting a tray in a thermoforming machine when the the trigger switch was touched, causing the machine door to close on their right hand. The employee sustained crushing injuries to the hand.

An employee was adjusting the tracking of a conveyor belt when their left hand/arm were pulled into the conveyor. The employee sustained fractures.

An employee was working to retrieve debris from a powered conveyor when the rollers contacted his right thumb, resulting in a laceration.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.