Collision between a moving and standing vehicle, nonroadway · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Lineage Logistics, LLC, 200 King Mill Rd., MCDONOUGH, GEORGIA 30253
on — Fractures, affecting the pelvis.
Final narrative
Two employees were operating high reach stand-up forklifts. Employee 1 was traveling north along an aisle in a room while employee 2 was putting away a pallet in the same aisle. Employee 1 jumped out of his forklift and was crushed between his forklift and employee 2's forklift. Employee 1 was hospitalized with a pelvic fracture.
HospitalizedPelvisForklift, order picker, platform truck-powered
An employee was stacking cases of product, each weighing approximately 10 - 20 pounds, onto a pallet inside a railcar. A pallet that was stored on an upper level dislodged and fell, striking the employee from behind. The employee sustained a dislocated left hip.
A turret forklift operator was reaching for a two-way radio when his finger contacted an energized (85V DC) wire on the forklift. The employee sustained an electrical shock and burn on his finger and was hospitalized.
On November 22, 2024, an employee was pulling a pallet of product from a second-level location using a high-reach lift. The pallet struck the pallet above it, causing the pallet on the third level to fall. The employee was struck by the falling pallet of 30-pound cardboard boxes filled with poultry products and he sustained fractures to his right tibia and fibula that required surgery.
Two employees were performing preventative maintenance on a machine. The injured employee noticed excess grease on the drive system and wiped it off with a rag while the machine was turned on and running at a slow speed. The rag was caught and the employee's hand was pulled into the drive system resulting in a partial amputation of his right index finger.
An employee was riding on a powered pallet jack near a sewer drain. The pallet jack hit a dip near the sewer drain, and the employee s left foot hit a clamp truck parked in a charging station. He suffered a cut to the big toe, as well as fractures in the toe and the foot.
An employee went to step off material handling equipment to grab their jacket when the throttle of the vehicle engaged. The vehicle reversed and the employee's left foot was crushed between two material handlers, resulting in a fracture.
An employee was working at a height of approximately 20 feet and was standing outside his forklift's basket attachment. His forklift was struck by another forklift, causing the employee to fall to the warehouse floor below. The employee sustained facial injuries, broke two ribs and an arm, and also suffered a head injury. The employee was wearing a harness at the time but it was not connected to an anchor point.
On November 8, 2023, an employee was operating a stand-up pallet jack in the warehouse. As he was backing up, the pallet jack struck the basket of a parked aerial lift. His right ankle became caught between the pallet jack and the aerial lift basket resulting in a fractured ankle.
On October 26, 2023, at approximately 12:00 PM, an employee operating a four wheeler was on their way to an off-property break location. The employee stopped the four wheeler near the administrative office to allow a log truck to exit the property. The log truck backed up, and the employee's left ankle was caught between the log truck trailer and the four wheeler, resulting in a fracture and laceration.
More severe injuries in this industry (NAICS 493110)
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.