Direct exposure to electricity, 220 volts or less · Electrical burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at University of Hartford, Taub Hall, WEST HARTFORD, CONNECTICUT 06127
on — Electrical burns, unspecified, affecting the hand(s), unspecified.
Final narrative
On July 28, 2020, a technician was investigating a lack of cooling in the HVAC system of a building. He determined there was a refrigerant leak. While showing his supervisor what had been found, the technician opened a 3-phase, 208-volt junction box and sustained electric shock and burns to his hands, resulting in hospitalization.
An employee was setting up music for a fitness class. As the employee plugged their personal device into the outlet, she was shocked. The employee experienced pain in her left side, mainly in her arm and head.
Two employees were testing the phase voltage of the 208 volt bus bar circuit. An arc flash occurred during the testing. One employee suffered burns to the face, neck, and hands. Another employee suffered burns to his arm.
An employee was removing boxes of filters from a skid when he tripped on a manual pallet jack. The employee fell and struck his back on the base of the pallet jack, resulting in hospitalization with fractured ribs.
An employee was walking through a parking garage. She tripped over a curb and fell forward onto her right knee, then her left knee, both hands, and her face. She suffered an injury to the left knee that required surgery, as well as scrapes on the chin and both palms and soreness in the left wrist.
An employee was using a hose to clear storm drains after a sewer backup. The employee fell backward and his head struck the curb, resulting in an Injury on the right side of his head, generalized bruising, and pain in his left ankle, right hip, left shoulder, and neck. The employee was hospitalized.
An employee was working on an exhaust fan on the roof when he tripped on a wire and fell to the ground. The employee sustained scrapes on his elbow, and a fractured right knee with a torn ACL. The employee was hospitalized.
An employee was replacing the back bracket on a deep fryer when her screwdriver slipped, causing her to fall forward into hot oil. She suffered burns on both arms up to the elbows (including the hands and fingers), as well as on the face and neck. She was hospitalized.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.