Struck by falling object or equipment, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Carroll Electric Cooperative Corporation, 884 CR 720, BERRYVILLE, ARKANSAS 72616
on — Fractures, affecting the multiple body parts, n.e.c..
Final narrative
Two employees were felling a de-limbed, live tree. They attached a rope to the tree to help control the direction of fall and ensure nothing fell toward the road. As the tree was falling, it went off course and the two employees went separate ways. One of the employees went into the path of the falling tree, which hit the left side of his back and hip area. He broke his left femur, lumbar spine, left hip, and left leg.
HospitalizedMultiple body parts, n.e.c.Trees
More severe injuries at Carroll Electric Cooperative Corporation
An employee was in an aerial lift/bucket truck trimming trees with a pole saw under a 7,620-volt powerline. Wind caught a tree trimming and blew it into the powerline. The tree limb then also struck the employee's left shoulder, creating an electrical connection. The employee suffered an electric shock and burns on the left side, resulting in paresthesia and weakness. They also sustained entry and exit wounds/blistering to the left shoulder and foot.
An employee was working as a spotter near a skid steer. At about 3:00 p.m., he approached the skid steer to speak with the operator, then turned to walk away. The skid steer then drove forward about 12 inches and caught the employee's left boot. The employee suffered fractures to the left tibia and fibula.
An employee was cutting and removing a fallen tree and was pinning down the power line and communication cables. As the tree was being cut and removed, the communication cable sprang up and struck the employee in the face. The employee was hospitalized with facial injuries.
An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.
An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.
An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.
More severe injuries in this industry (NAICS 221122)
An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.
An employee (a lineman) was working to restore power by installing a hand line when he contacted a high-voltage device (7,200 volts), resulting in electrical burns to his upper body and hands.
A chain sling failed while a utility pole was being removed. A chain link struck an employee who was operating a front-end loader, puncturing the employee's chest.
An employee was working with an underground crew to troubleshoot a BUD failure. The employee was removing a fuse from the fuse holder when the fuse blew on the riser and an arc flash occurred. The employee was hospitalized with burns to his face, nose, lips, and neck.
An employee was connecting two wires when his rubber insulated gloves failed and he suffered an electric shock to his right hand, resulting in an electrical burn.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.