Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at P A Hutchison Co., 400 Penn Ave., MAYFIELD, PENNSYLVANIA 18433
on — Amputations, affecting the fingertip(s).
Final narrative
At about 8:00 a.m. on August 14, 2020, an employee was adjusting a binding machine when its feed hopper lowered and crushed the employee's left index finger. The fingertip was medically amputated. The machine's safety interlock was not operational at the time of the incident.
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 323117)
An employee was operating a press and manually feeding paper into the press when their right hand was caught in the press, resulting in several broken bones. The employee was hospitalized.
An employee was stepping off a forklift when they bumped the directional switch causing the forklift to roll forward and crush the employee's toe. The toe was partially amputated.
An employee was setting up a board-cutting machine when their right hand was caught in the machine. The employee sustained a crush injury to the hand that involved the tendons.
An employee was making routine adjustments to a machine when their left hand slipped and became caught in a gear. The employee's ring finger was partially amputated.
Employees were looking at an intake fan problem on a press. One employee was testing the tension on a belt when his right index finger was caught between the belt and the pulley. He suffered a partial amputation to the finger.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.