105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Sub Zero, Inc.

Struck by falling object or equipment, n.e.c. · Fractures

Federal OSHA recorded a severe workplace injury at Sub Zero, Inc., 6061 Basswood Drive, MADISON, WISCONSIN 53711 on — Fractures, affecting the lower leg(s).

An employee was pulling a wheeled cart containing parts to another area of the assembly line. During transport, the cart hit a floor mounted rail track in the aisle, causing the cart to tip over. The cart struck the employee's lower right leg and fractured the tibia and fibula.

Hospitalized Lower leg(s) Cart, dolly, hand truck-nonpowered

Sub-Zero, Inc.

An employee was carrying empty boxes to a recycling bin when they tripped on a conveyor roller guide and contacted a rack. The employee sustained a contusion to their ribs and injuries to internal organs.

Sub-Zero, Inc.

An employee was reversing the right-angle pneumatic driver equipped with a tapping bit when the driver caught his glove and twisted it around the tapping bit, damaging his left pinky finger. The pinky finger was amputated at the first joint in the emergency room.

View Sub Zero, Inc.'s full OSHA safety record →

Performance Contractors, Inc.

An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.

WIRECO WORLDGROUP, INC.

An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.

Owens & Minor - Pittsburgh Distribution Center

The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.

Retro Tech Systems

Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.

Creston Energy Group

An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.

Sub-Zero, Inc.

An employee was carrying empty boxes to a recycling bin when they tripped on a conveyor roller guide and contacted a rack. The employee sustained a contusion to their ribs and injuries to internal organs.

GE Appliances, a Haier Company, Decatur Plant Operations

An employee was trying to get wheel parts to feed down into a bucket below a storage rack. The bin needed to be reoriented so the parts door would open; a powered industrial truck was brought over to pull out the container and turn it 45 degrees. When the container moved, a finger on the employee's right hand was caught between the bin and the steel rack. The fingertip was medically amputated.

Sub-Zero, Inc.

An employee was reversing the right-angle pneumatic driver equipped with a tapping bit when the driver caught his glove and twisted it around the tapping bit, damaging his left pinky finger. The pinky finger was amputated at the first joint in the emergency room.

General Electric Company

An employee was starting up an extrusion machine when the machine "kicked out" or faulted. The employee's gloved hand was caught in the auger. The employee sustained a partial amputation of the right index finger between the first and second digit.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.