Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at General Electric Company, 2328 Point Mallard Drive SE, DECATUR, ALABAMA 35601
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was starting up an extrusion machine when the machine "kicked out" or faulted. The employee's gloved hand was caught in the auger. The employee sustained a partial amputation of the right index finger between the first and second digit.
An employee was working on electrical wiring in the control room without air conditioning when they began feeling ill. The employee was hospitalized with a heat-related illness.
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 335222)
An employee was carrying empty boxes to a recycling bin when they tripped on a conveyor roller guide and contacted a rack. The employee sustained a contusion to their ribs and injuries to internal organs.
An employee was trying to get wheel parts to feed down into a bucket below a storage rack. The bin needed to be reoriented so the parts door would open; a powered industrial truck was brought over to pull out the container and turn it 45 degrees. When the container moved, a finger on the employee's right hand was caught between the bin and the steel rack. The fingertip was medically amputated.
An employee was pulling a wheeled cart containing parts to another area of the assembly line. During transport, the cart hit a floor mounted rail track in the aisle, causing the cart to tip over. The cart struck the employee's lower right leg and fractured the tibia and fibula.
An employee was reversing the right-angle pneumatic driver equipped with a tapping bit when the driver caught his glove and twisted it around the tapping bit, damaging his left pinky finger. The pinky finger was amputated at the first joint in the emergency room.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.