105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Apex Tool Group, LLC

Caught in running equipment or machinery, n.e.c. · Fractures and other injuries, n.e.c.

Federal OSHA recorded a severe workplace injury at Apex Tool Group, LLC, 3990 East Market Street, YORK, PENNSYLVANIA 17402 on — Fractures and other injuries, n.e.c., affecting the multiple body parts, n.e.c..

An employee was setting up a drill press. The employee's shirt and hair were caught in the drill bit, causing injuries including a right ear injury, a broken left pinky finger and scalping.

Hospitalized Multiple body parts, n.e.c. Drills-stationary

Apex Tool Group LLC.

An employee was forming parts on a brake press when his right index finger was partially amputated.

Apex Tool Group, LLC

An employee was operating a drill when his right thumb came in contact with the running drill bit, damaging his tendon.

Apex Tool Group, LLC

While walking through the parking lot, an employee was struck by a coworker's vehicle, fracturing the employee's right leg.

Apex Tool Group LLC.

An employee was operating a brake press. She reached for a piece of metal and stepped on the press pedal. The press cycled and partially amputated her right middle and ring fingers, requiring surgery.

Apex Tool Group LLC.

An employee and a contractor were using a scissor lift to reach the top of the black powder spray booth where steel tanks are brought in to be painted. The employee was going to clean the top of the booth, while the contractor was going to work on the lighting in the area above the booth. The product-carrier which brings the steel tanks to the paint booth was not locked out. The product-carrier started to bring a steel tank to the spray booth and made contact with the scissor-lift. The carrier tipped the scissor-lift over. The employees were thrown roughly six feet when the scissor-lift impacted the ground.

View Apex Tool Group, LLC's full OSHA safety record →

Scout Surface Solutions

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

Gilster-Mary Lee Corporation

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

Maxwell Paper Products Co

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

Turkey Hill LLC

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

Erie Strayer Company

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

OKLAHOMA STEEL & WIRE CO. INC.

An employee was driving a powered industrial truck (PIT) carrying a nesting sheave on the back counterweight of the PIT. He was holding the sheave when the PIT struck a pothole in the floor, causing the sheave to roll forward and crush his right index fingertip against the back of the PIT seat frame. The employee's fingertip was amputated, requiring hospitalization and surgery.

Certified Slings & Supply

An employee was building slings. They were placing wire rope in a pneumatic vise when their right index finger was caught between the vise and the wire rope, resulting in a fracture that required hospitalization and surgery.

Trion Industries, Inc.

On September 15, 2025, an employee was working on an auto-welder when the guard closed on their left ring finger, resulting in a fingertip amputation.

Bright Coop, Inc

At about 7:15 a.m. on August 28, 2025, an employee was using a construction compactor to stabilize the dirt of a dam that had just been built. The dirt gave way underneath the compactor, which tipped on its left side. The employee fell out and was crushed and pinned between the compactor and the dirt. He was hospitalized, having suffered a broken sternum and broken ribs on both sides, as well as a laceration to the left leg by the ankle joint.

Viakable Manufacturing LLC

A temporary employee was stripping wire for scrap when the machine crushed their left thumb and little finger.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.