Compressed or pinched by shifting objects or equipment · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury
at JSW Steel USA, 5200 E. McKinney Rd. #110, BAYTOWN, TEXAS 77523
on — Crushing injuries, affecting the finger(s), fingernail(s), unspecified.
Watch JSW Steel USA — freeGet an email when a new federal OSHA severe-injury report for JSW Steel USA is published. One employer, no account, unsubscribe in one click.
Final narrative
Employees were performing maintenance on a crimp press. The employees were using an impact (pneumatic) wrench to remove bolts from a vertically positioned cylinder in the crimp press. The injured employee was supporting the weight of the impact wrench to keep it steady. His fingers were underneath the vertically positioned impact wrench, away from the nut being removed. When the final nut was loosened, the cylinder slid down and crushed his pinky finger between the back/bottom of the impact wrench and the metal below it.
HospitalizedFinger(s), fingernail(s), unspecifiedMachine and appliance parts, n.e.c.
An employee was kicking out a piece of pipe. As the pipe kicked out, the two jack cylinders from the turn rolls were not fully retracted, causing the pipe to knock the turn rolls over. As the employee placed his hand on the frame and was attempting to re-center the turn rolls, the frame of the turn rolls slid off the jack cylinders and pinched his left middle finger against the frame assembly and the floor plate. As a result, his left middle finger was partially amputated.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 331111)
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.
An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.
An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.