Gulf Stream Marine, Inc.

An employee was walking to the gangway of a vessel. Their left hand was caught by the roller track of a hatch cover on the vessel resulting in partial amputations to the index and middle fingers and a laceration to the same area.

Two employees were discussing an operational assignment when a reversing forklift ran over the injured employee's right foot, resulting in a fractured right ankle.

The injured employee was removing a piece of 4" x 4" lumber from steel slab cargo in the yard area while another employee was operating a heavy-duty powered industrial truck (PIT) to lift a steel slab with magnets using a reach stacker. The lift was reversing with the cargo hoisted when the rear tire of the PIT hit a pothole and caused the slab to swing back and forth. As a result, the steel slab struck the injured employee in his abdominal area. The employee suffered a pelvic fracture, fractures to the L4 and L5 vertebrae, and a possible bladder contusion.

A load of cargo from a vessel was being landed on the dock. The injured employee walked towards the load in order to unhook the rigging, when one of the 4-ton round steel bars rolled and came to rest on his left foot. The employee was hospitalized with a fractured left ankle.

An employee was removing a chain binder that was used to secure cargo to a vessel. While working to free the handle of the tension binder from the deck plate using the handle of another binder, the binder suddenly released and struck the employee on the left side of his face and on the right thumb. The employee sustained a fractured right thumb and a laceration on the left cheek.

An employee was walking back to her workstation. A forklift reversed a short distance, then completed a U-turn and struck her, running over her lower extremities. She was hospitalized with a broken ankle.

An employee was training on a jockey truck. Upon stepping out of the truck, the employee was struck by a rubber tire gantry crane, resulting in amputations of the right leg above the knee and left leg below the knee.

An employee was standing at the rear of a double pallet jack. Another double jack approached, and the employee's lower leg was caught between the two pieces of equipment. He suffered a broken tibia and fibula.

An employee was unloading large material bags on a loading dock. A forklift tine pinned the employee's foot against a pallet, causing the employee to fall and suffer a broken ankle.

An employee was pushing a container when they were struck by a forklift. The employee sustained a left leg fracture.

While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.

An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.

The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.

An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.

An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.