MILWAUKEE, WISCONSIN—
General Mills
Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at General Mills, 4625 S. 6th Street, MILWAUKEE, WISCONSIN 53221 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was working on the empty tote conveyor. As he was putting a chain onto a sprocket, a box passed through a photo eye, triggering the conveyor. The employee was caught by the sprocket and chain, sustaining the amputation of 1/8" of the left ring fingertip.
More severe injuries at General Mills
COVINGTON, GEORGIA—
GENERAL MILLS
An employee was changing the belt of a sorting machine. He was on his knees, changing the drive belt under the machine, when lost his balance and hit his head on the framework. He suffered an injury that caused numbness in both arms and hands and was hospitalized.
JOPLIN, MISSOURI—
General Mills
An employee went to grab his lunch box from a table in the breakroom. He rotated, took a few steps, and then fell to the floor. The employee sustained right femur fracture and was hospitalized.
JOPLIN, MISSOURI—
General Mills
An employee was troubleshooting a palletizer that wasn't working. While walking on the conveyor, the employee jumped to reach a photo eye and fell on his leg, resulting in a fractured femur.
ROANOKE, TEXAS—
General Mills
An employee was operating a forklift and picking a pallet when the vehicle contacted a nearby parked forklift that had the forks raised. The employee sustained a left foot fracture and laceration.
KANSAS CITY, MISSOURI—
GENERAL MILLS
An employee was working in the corn starch room of a mill when they began to experience heat stress that required hospitalization.
View General Mills's full OSHA safety record →
Similar incidents · Same event type
CULLODEN, WEST VIRGINIA—
Service Wire Company
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
OMAHA, NEBRASKA—
Oriental Trading Company, Inc.
An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.
MCALLEN, TEXAS—
Fox Packaging
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
SALTILLO, MISSISSIPPI—
Ashley Furniture Industries, Inc.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
BEDFORD HEIGHTS, OHIO—
ITW Bedford Wire
An employee's right hand was caught in a wire drawing machine, resulting in amputation.
More severe injuries in this industry (NAICS 311919)
MC COOK, ILLINOIS—
Assemblers, Inc.
While attending the slab line, an employee observed that dough was accumulating on the plastic blades. He proceeded to clean the blades. His left index finger came into contact with an adjacent blade that moves laterally (left to right), resulting in a partial amputation.
ALSIP, ILLINOIS—
Quality Snack Foods, Inc.
A sanitation employee entered the chemical room and slipped on the wet floor. When he slipped, he kicked over a bucket containing cleaning chemicals. The chemicals splashed onto the employee's clothing and burned his skin.
ORLANDO, FLORIDA—
Frito Lay Inc.
An employee's right middle fingertip was caught between a chain and a sprocket in a machine. The fingertip was amputated. The machine was unguarded at the time.
MOBILE, ALABAMA—
Mckee Foods Corporation
An employee had just finished unloading material from a truck. He was descending using the truck's built-in ladder when he missed the last rung, fell to the ground, and broke his hip and left wrist.
ABILENE, TEXAS—
Rolling Frito-Lay Sales, LP
An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.