Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Tuff Shed, INC., 512 Jetton Street, TAMPA, FLORIDA 33619
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was using a miter saw to cut a 2-by-4. As the employee lowered the saw, the 2-by-4 jumped, causing the blade to amputate the employee's left thumb above the first knuckle.
An employee had been at a customer's home doing warranty work on a shed. After returning to the shop, the employee almost passed out and felt numbness/tingling in one arm. The employee was hospitalized for heat exhaustion.
While working in the factory/warehouse, an employee observed a trash truck that was dropping off a 20- to 30-yard roll-off dumpster. He noticed some pallets in the area that he thought needed to be moved and yelled at the driver to stop. The driver stopped, but only to release the chain to free the dumpster so it could be positioned. The driver did not hear the employee and proceeded to make the drop. The employee attempted to get up from the area but was struck by the dumpster. He was caught between the dumpster and the loading dock, fracturing his right tibia.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was working on flooring tile, which required several continuous hours of kneeling. The next morning, he noticed fluid and swelling on the right knee. When he knelt to perform work tasks, he felt an immediate sharp, burning pain. The employee was hospitalized with an infection.
An employee was using a circular saw to cut rafters when their hand contacted the blade, resulting in amputations to their left ring and index fingertips.
The injured employee was inside a scissor lift. The scissor lift operator turned the lift to the left and crushed the injured employee's right hand between the wall and the lift. The injured employee sustained a right hand fracture.
An employee was operating a forklift to move material. They slipped on the step while descending from the forklift and fell to the ground, fracturing their tibia. The employee was hospitalized.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.