Johnson's Quick Lube, Inc

An employee was using an air compressor on a multi-wheel tire when the flange and the tire burst, causing the wheel's lock ring to strike the employee in the face. He sustained a laceration and facial fractures.

An employee was changing the connection to a compressed nitrogen tank when the system failed and exploded. One employee suffered a concussion and was hospitalized. The other employee sustained soft tissue injuries that did not require hospitalization.

An employee was putting air in a tire that was mounted on a customer's vehicle when the tire exploded, resulting in a left arm fracture that required hospitalization.

An employee was working in a kitchen when a spray can of oil exploded. Hot oil splashed onto the employee, burning their face and arms.

On October 24, 2023, at 12:00 PM, an employee was visually checking a gauge on the "U" controller when a pressure tank exploded. The employee was hospitalized with multiple facial fractures and required surgery.

An employee was replacing the cutting edges on the bucket of a wheel loader. The bucket had been lowered onto composite blocking to prevent it from falling to the floor. The blocking dislodged and the bucket fell and crushed the employee's left hand.

An employee was walking on top of a piece of equipment while engaged in repair activities. The employee stepped onto a rotating impeller shaft of a belt-driven exhaust fan and sustained a partial amputation to their right leg below the knee and amputation of their left hand.

An employee was installing an automobile lift at a client location and put the lift on a safety lock. The employee's right hand was caught in the lift and crushed, causing the amputation of the little finger at the last knuckle and all of his right fingers were fractured.

On April 18, 2025, an employee was cutting the lid off an empty 55-gallon drum using a plasma cutter. The drum originally contained a flammable liquid and residual liquid inside the drum ignited and exploded. The employee was hospitalized with burns to the face, chest, and arms.

An employee was unlocking a yard gate from within a car. His finger was caught between the gate and the car, and the fingertip was amputated.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.