Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Glanbia Nutritionals NA, Inc., 301 HEFFERNAN DRIVE, WEST HAVEN, CONNECTICUT 06516
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An operator was putting product into a hopper. There were issues with processing the product through the grater/strainer. While the operator was pushing the product, a finger on their right hand contacted the auger resulting in partial amputation.
AmputationFinger(s), fingernail(s), unspecifiedMixers, blenders, whippers-food and beverage
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311822)
A team was disassembling a dough pump s auger to allow the wastewater to drain from an allergen changeover. The auger became stuck due to suction caused by residual wet dough. A paddle was being used to pry the auger loose when the suction force suddenly released, causing the auger to retract unexpectedly. A finger on the employee's left hand was caught between the auger and the housing, leading to an amputation to that finger.
On February 4, 2025, at approximately 6:20 PM, an employee was cleaning the dough inside a divider when they sustained an amputation to their right index fingertip.
An employee was troubleshooting a mixer on the biscuit line when their hand became caught under the machine belt, resulting in fractures and an amputation of their middle fingertip. The machine was not locked out/tagged out at the time.
An employee was operating the bake sealer (used to seal the product) on the line and there a change over in the process. The employee was moving the bake sealer when he slipped and his hands were caught between the moving belts of it, resulting in a partial amputation of the left little finger.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.