Evoqua Water Technologies LLC

An employee was welding and had cramping in his arms and hands. He was hospitalized for heat stress and dehydration.

An employee was using a dolly to remove bottles from a box truck when he slipped and fell on the dock plate, landing flat on his back and striking his tailbone.

While treating water in an aboveground tank, an employee became ill from heat exhaustion and was hospitalized.

An employee was attempting to replace the permeate port on the end-cap of a reverse osmosis vessel. The equipment retained pressure, which caused the end-cap to be forcibly removed. The pressurized end cap struck the employee's right hand against a support member, amputating two fingers.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was replacing a water check valve at a water plant. He was lifting the valve with two hands when it slipped and contacted his right ring finger, resulting in a partial amputation without bone loss.

The injured employee was assisting with hitching a trailer to a truck. The employee was working to engage the lunette ring on the trailer with the pintle hook on the truck. A mini-excavator began driving onto the rear of the trailer. The added weight caused the rear of the trailer to lower and the front to rise, creating a pinch point between the trailer and the truck. The employee s left thumb was caught in the latch mechanism of the pintle hook. The thumb tip was partially amputated and required surgery.

An employee was spraying down an area by a conveyor he had been using. Moving parts (such as rollers and chains) inside a gear box amputated his right arm at the elbow. The employee was hospitalized.

An employee was adjusting a machine attached to a tractor that rolls out hose into a trench. The machine lowered to the ground and part of it landed on his big toe, amputating it.

An employee was stung by a bee while working in the field. The employee suffered an allergic reaction and was hospitalized.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.