NEWPORT, ARKANSAS—
Arkansas Steel Associates, LLC
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Arkansas Steel Associates, LLC, 2803 Van Dyke Rd, NEWPORT, ARKANSAS 72112 on — Amputations, affecting the fingertip(s).
Final narrative
Two employees were tightening down bolts on a press punch block. As the last bolt was being tightened down, the wrench slipped and part of the press block fell on the hand of the employee holding up the press block. The employee's left ring finger was pinched between the ratchet tool and a punch that was hanging down, causing an amputation of the fingertip.
More severe injuries at Arkansas Steel Associates, LLC
NEWPORT, ARKANSAS—
Arkansas Steel Associates, LLC
An employee was checking the brakes on a cab crane while donned in a safety harness with a 6 ft. lanyard. The employee leaned over a gear box that controls the auxiliary hoist to the crane and his lanyard was caught in a shaft that was turning inside the gear box. When the lanyard was caught it pulled the employee quickly to the catwalk surface on top of the crane. During the fall the employee hit his head and suffered a scapula fracture due to being constricted by his harness. The employee was admitted to the hospital.
NEWPORT, ARKANSAS—
ARKANSAS STEEL ASSOCIATES, LLC
An employee was working in the rolling mill when he began to feel nauseous, light-headed and started cramping. The employee was hospitalized for heat exhaustion.
View Arkansas Steel Associates, LLC's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 331111)
NORTH JACKSON, OHIO—
Universal Stainless & Alloy Products Inc.
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
MOUNT PLEASANT, TEXAS—
Priefert Manufacturing
An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.
PUEBLO, COLORADO—
CF&I Steel L.P.
An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.
BRADDOCK, PENNSYLVANIA—
United States Steel Corporation
An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.
TAMPA, FLORIDA—
Tampa Bay Steel, LLC
An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.
More severe injuries in ARKANSAS
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
TEXARKANA, ARKANSAS—
The Goodyear Tire & Rubber Company
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PINE BLUFF, ARKANSAS—
American Tile & Marble Co., Inc
An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.
SCRANTON, ARKANSAS—
Johnson Industrial Coatings, LLC.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.