Fall from collapsing structure or equipment 6 to 10 feet · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at S.L. CHASSE WELDING & FABRICATING, INC., 12-14 N. Main St., ROCHESTER, NEW HAMPSHIRE 03867
on — Cuts, lacerations, affecting the leg(s), unspecified.
Final narrative
An employee was installing structural steel. The beam the employee was sitting on dislodged and fell off the support it was on causing the employee to fall 10 feet. The employee was hospitalized with a leg laceration.
HospitalizedLeg(s), unspecifiedBeams-unattached metal
On December 15, 2023, the injured employee was working from a ladder. A co-worker climbed the backside of the ladder and the ladder failed. The injured employee fell approximately 8 feet to the ground and sustained multiple fractures.
An employee was installing grout using a shovel when the precast hollow-core floor gave way, causing them to fall approximately 8-10 feet. The employee sustained a back fracture.
An employee was assisting with assembly of a two-level scaffold. The scaffold fell, causing the employee to fall 8 feet from the second level to the concrete surface below. The employee sustained fractures to the face, jaw, and both wrists.
An employee was repairing an egg collector when the platform collapsed and he fell 10 feet to the concrete floor. The employee sustained a fractured left leg.
An employee was descending a ladder when it collapsed, causing him to fall approximately 8 feet. The employee was hospitalized with a compound fracture to his left leg and a left wrist fracture.
More severe injuries in this industry (NAICS 238990)
A crew was relocating a dumpster (containing approximately 200 pounds of demolished wire) to access the uninterruptible power supply (UPS) units they were servicing. During movement of the dumpster, a section of carpet tile dislodged from the floor, causing an employee to lose his footing, slip, and fall. He landed on his right wrist, resulting in a fracture.
An employee was cutting a board using a circular saw. The saw pinched, kicked back, and cut the employee's left ring and little fingers. The employee suffered an amputation to the little finger.
An employee was using an aluminum extension ladder to remove gutters at a height of approximately 20 feet. As they were removing the gutters, part of the gutter collapsed and struck the ladder, causing it to move sideways. The employee fell from the ladder and sustained fractures to ribs on the left side and their right forearm.
An employee was using an electric saw to cut a piece of wood for a fence. The saw slipped out of his hand and lacerated his left leg. He was hospitalized.
An employee was erecting a scaffold. A side bracket was not secure. The employee stepped on the bracket to test it and fell 18 feet to the concrete floor resulting in fractures to the ankles and femurs. He was not using fall protection equipment.
An employee was lowering the bucket of a track loader that contained a grade stake and the grade stake punctured his foot, resulting in hospitalization and surgery.
An employee was using a pike to move a pallet of sugar that was stuck in the powder racking. The employee fell backward, landing on his right leg. The employee's leg was fractured and he was hospitalized.
An employee was working to fix the forks on a forklift when the fork(s) fell on her toes. The second and third toes on her right foot were fractured, lacerated, and required stitches.
An employee was delivering a 65-foot boom lift to a rental customer's construction site. The employee set up the ramp truck in the parking lot adjacent to the construction site. He elevated the boom 4-5 feet to clear a temporary fence. While driving the boom lift off the ramp, the wheels slid to the driver's side of the ramp truck, ultimately sliding off the ramp. The boom lift fell off the side of the truck and rolled onto its side. The employee sustained a fractured clavicle, a dislocated shoulder, separated/fractured ribs, a punctured lung, and a fractured left femur. The employee required surgery.