Fall from collapsing structure or equipment 6 to 10 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Structural Precast Erectors, LLC, Vive Apartments, FORT MYERS, FLORIDA 33905
on — Fractures, affecting the back, including spine, spinal cord, unspecified.
Final narrative
An employee was installing grout using a shovel when the precast hollow-core floor gave way, causing them to fall approximately 8-10 feet. The employee sustained a back fracture.
HospitalizedBack, including spine, spinal cord, unspecifiedFloor, n.e.c.
On December 15, 2023, the injured employee was working from a ladder. A co-worker climbed the backside of the ladder and the ladder failed. The injured employee fell approximately 8 feet to the ground and sustained multiple fractures.
An employee was assisting with assembly of a two-level scaffold. The scaffold fell, causing the employee to fall 8 feet from the second level to the concrete surface below. The employee sustained fractures to the face, jaw, and both wrists.
An employee was repairing an egg collector when the platform collapsed and he fell 10 feet to the concrete floor. The employee sustained a fractured left leg.
An employee was descending a ladder when it collapsed, causing him to fall approximately 8 feet. The employee was hospitalized with a compound fracture to his left leg and a left wrist fracture.
On January 17, 2023, an employee was investigating a staircase that did not fit properly. He descended down the staircase that was temporarily installed and it fell approximately 8 feet. He landed on his feet and sustained a foot fracture and compression fracture of a vertebra.
More severe injuries in this industry (NAICS 238120)
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
An employee was standing on the surface of a steel beam about two feet wide. He slipped and fell backward, landing on the concrete ground about 20 feet below. The employee sustained a broken pelvis.
An employee was unloading a rebar delivery from a flatbed, 19-wheel trailer. The employee rigged the load with wire rope chokers. The load was picked up 3-4 feet above the trailer deck by a crane. The load began to swing and the employee grabbed onto it to prevent it from being pushed off the trailer deck. The crane continued to lift the load, and the employee let go so the crane did not lift him to the third story. The employee fell approximately 12 feet to the ground below, resulting in a back injury and fractured vertebrae.
An employee was attaching a steel angle plate weighing (approximately 200 pounds) to the end of a structural member (5,000 pounds) and was supported by dunnage. The dunnage was a crane mat (11 inches tall) with a 4x6 board on top of it and it supported five identical members. The main piece was 30.75 feet long, 37.25 feet tall, and 1 food wide. As the employee slid the piece of metal on top of the member to begin attaching it, the entire member began to tip over. The employee went to stop the main piece from tipping over and it landed on his ankle, fracturing it.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.