105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

NCI Group, Inc.

Caught in running equipment or machinery, unspecified · Cuts, lacerations

Federal OSHA recorded a severe workplace injury at NCI Group, Inc., 7301 Fairview St., HOUSTON, TEXAS 77041 on — Cuts, lacerations, affecting the hand(s), unspecified.

An employee was making adjustments to a limit switch located inside the slide gate electrical box. The motor actuated and his hand was caught between the chain and the sprocket. The employee sustained a laceration to the right hand that required stitches and hospitalization.

Hospitalized Hand(s), unspecified Machinery, unspecified

NCI Group, Inc.

An employee was moving bar stock. The employee's left index finger was caught and crushed between a conveyor roller and a piece of the stock. The finger was medically amputated.

NCI Group, Inc.

An employee was moving bar stock on the conveyor for a vertical bandsaw. The conveyor actuated, and his left index finger was crushed between a conveyor roller and the piece of bar stock he was working with. The fingertip was medically amputated.

NCI Group, Inc.

An employee was handling metal material and suffered a hernia.

NCI Group, Inc.

An employee had just lowered a spreader bar using a crane. When he removed the hook and raised the crane, it clipped the spreader bar and caused it to tilt over, landing on his left foot. The employee was hospitalized with a left foot fracture.

NCI Group, Inc

An employee was operating an overhead crane to move a coil to a staging rack. After setting the coil down next to another coil, the employee did not move the chain, which was caught between the two coils. When the employee went to move the crane with the lodged chain, the coil became unstable and began to fall. The employee stepped out onto the staging rack to stabilize the coil with his hands. The coil was too heavy and fell onto the rack and the employee's right and left legs. As a result, the employee suffered amputation of the left leg and a fracture to the right leg.

View NCI Group, Inc.'s full OSHA safety record →

Service Wire Company

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

Oriental Trading Company, Inc.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

Fox Packaging

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

Ashley Furniture Industries, Inc.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

ITW Bedford Wire

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

CSBS Manufacturing LLC

Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.

Standard Structures, Inc.

An employee was moving and handling cardboard boxes when he sustained a laceration to his left ring finger from a box. The laceration became infected and required hospitalization and surgery.

Prime Metal Buildings & Components

An employee was positioning a piece of metal trim for a test bend in a single-fold bend machine. Their right middle fingertip was pinched by a clamp on the machine, resulting in a partial amputation.

Prime Metal Buildings & Components

An employee was operating a double folding machine and positioning a piece of metal trim in the folding clamps for a test bend. The machine activated and the crank (lower control arm that bends the trim) came up and cut through the employee s glove, amputating their right middle fingertip.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.