105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Zekelman Industries

Caught in running equipment or machinery, unspecified · Fractures and dislocations

Federal OSHA recorded a severe workplace injury at Zekelman Industries, 1 Council Avenue, WHEATLAND, PENNSYLVANIA 16161 on — Fractures and dislocations, affecting the toes(s), toenail(s).

An employee was standing at a manufacturing turnstile that held coils. The turnstile was turned on and moved to its "home" position. The employee's boot was caught under the turnstile plate, which fractured and dislocated his toes.

Hospitalized Toes(s), toenail(s) Machinery, unspecified

Zekelman Industries

An employee was reaching for a pipe that was extruded from a die block. The pipe recoiled back toward the die block, causing the employee's finger to become pinched and amputated.

Zekelman Industries

An employee was spotting for a lift while it was moving a modular unit. The modular unit swayed and struck the employee, crushing him against a stationary modular unit. The employee was hospitalized with blood vessel damage requiring surgery.

Zekelman Industries

An employee was stepping down while walking into an area. His foot rolled and he fell onto a concrete floor, breaking his left lower tibia and fibula.

View Zekelman Industries's full OSHA safety record →

Service Wire Company

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

Oriental Trading Company, Inc.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

Fox Packaging

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

Ashley Furniture Industries, Inc.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

ITW Bedford Wire

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

Floworks International LLC

An employee fell while entering the building. The employee was hospitalized with a fractured ankle and required surgery.

Big River Steel, LLC

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

Keystone Consolidated Industries, Inc.

An employee was working to close a furnace door. The hydraulic mechanism that opens and closes the furnace door was non-operational and had been disconnected to allow the furnace door to be opened manually. As the employee was releasing the pins that held the door open, the door and the hydraulic cylinder fell, pinching their left hand between the hydraulic cylinder's base plate and the furnace. The employee suffered amputation of the little fingertip.

Commercial Metals Company

A rolling mill was shut down due to a cobble between two mill stands. The injured employee was cleaning the cobble from the delivery side of stand A, while another employee went to the control panel to move stand B and stand A moved instead. The injured employee's right thumb got caught between the delivery guide of stand A and the looper trough. The tip of his thumb required surgical amputation to the bone to allow for stitches.

Metalcraft of Mayville, Inc.

An employee was helping another employee load stock material onto a press brake when the stock slipped. The injured employee's right index finger was caught between the press brake die and the stock, resulting in amputation at the first knuckle.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.