105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Ahlstrom-Munksjo

Fall through surface or existing opening, unspecified · Fractures

Federal OSHA recorded a severe workplace injury at Ahlstrom-Munksjo, 600 Thilmany Rd., KAUKAUNA, WISCONSIN 54130 on — Fractures, affecting the ankle(s) and leg(s), n.e.c..

An employee was wrapping finished rolls of paper when their right leg became caught in a gap between the platform and the wrap machine's roller, resulting in fractures to their lower right leg and ankle.

Hospitalized Ankle(s) and leg(s), n.e.c. Machine platforms

Ahlstrom-Munksjo

An employee was operating the winch to pull coal rail cars. The employee's left ring finger was caught between the rope and the winch resulting in a partial amputation.

Ahlstrom-Munksjo

An employee was working on a valve body. As he was looking for a tool in a cabinet, the drawer closed on his finger, resulting in a right ring fingertip amputation.

Ahlstrom-Munksjo

An employee was working in the recovery boiler area which is a warm environment. He started experiencing shortness of breath and cramping during his walk-around. The employee was hospitalized for kidney failure due to heat stress.

Ahlstrom-Munksjo

On January 10, 2022, an employee was driving a semi trailer toward a dock door. During a 90-degree turn, the trailer tipped onto its passenger side and struck a power pole. The employee fell to the passenger-side door, suffering a broken collarbone and three broken ribs.

Ahlstrom-Munksjo

An employee was at his locker, gathering his equipment when he began feeling ill. The employee went into the cooling room to sit for approximately 20 minutes. The employee left the cooling room to report to his supervisor that he was feeling unwell. While his supervisor was talking to him, the employee collapsed in the supervisor's office and was unresponsive. The employee was hospitalized for heat stress.

View Ahlstrom-Munksjo's full OSHA safety record →

Scott Manufacturing, Inc.

An employee was power washing a metal tank from an elevated platform. They fell through a gap between the platform and the tank. The employee landed on the ground and sustained fractures to their ankles and feet.

Tamiami Builders Inc.

An employee was installing a metal roof when he stepped on a skylight. The employee fell through the skylight to the ground, resulting in head and shoulder fractures.

Air Source America, LLC

An employee was replacing an HVAC unit in a residential home. While he was in the attic space above the garage, the wood he was walking on broke, causing the employee to fall through the sheetrock to the concrete floor below. The employee bumped his head and sustained a shoulder injury as well as a broken ankle.

Russell Landscape Partners, LLC

An employee was putting a tarp on a water tank while standing on a trailer. She lost her footing and fell through the trailer bed, striking the corner of the trailer bed. The employee sustained internal bleeding.

BELFOR Property Restoration

An employee was repairing a sub-floor in a residential house that had water and fire damage. The employee fell through the sub-floor and landed in the basement, resulting in spinal fractures that required hospitalization.

Georgia-Pacific Palatka, LLC

Tools and parts were being lowered to the ground from an elevated platform in a 5-gallon bucket. The rope being used to lower the bucket failed; the tools and parts fell and lacerated the left forearm and upper left leg of an employee on the ground.

International Paper

An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.

Sofidel America, Corp

An employee was working to clear a jam from a paper napkin folder. The ram that advanced the napkins pushed the employee's right arm into the side of the machine, causing several lacerations and a hairline fracture.

Akers Packaging Services Group

An employee was troubleshooting overflowing ink on a printer-slotter machine when their right ring fingertip was caught in a guarded roller, resulting in a partial amputation.

Domtar

An employee was disconnecting wires in preparation to swap out a refiner motor when they contacted energized equipment and sustained an electrical shock. The employee was hospitalized.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.