Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Tonnard Manufacturing Corporation, 715 Spring Street, CORRY, PENNSYLVANIA 16407
on — Amputations, affecting the fingertip(s).
Watch Tonnard Manufacturing Corporation — freeGet an email when a new federal OSHA severe-injury report for Tonnard Manufacturing Corporation is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was loading a metal part into a press brake. The employee was readjusting the part when the machine partially cycled. Her left middle finger was caught between the part and the die, and the fingertip was amputated.
AmputationFingertip(s)Brake presses
More severe injuries at Tonnard Manufacturing Corporation
An employee was operating a mechanical power press. The machine cycled and the pull-backs on his wrists did not pull his hands out of the way of the die as it came down. It crushed his left index, middle, and ring fingers, with a middle finger amputation.
An employee was standing near a sander, de-burring metal parts and placing them on a storage rack. A metal part was ejected from the sander and struck the employee's left hand, causing a fracture and laceration to their little finger. The machine was unguarded at the time.
An employee was starting a press. While feeding material into the die, a steel slug was ejected from the point of operation, struck the employee, and imbedded in their chest. The employee was hospitalized.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 332119)
A forklift operator was switching out a propane tank on his forklift when the tank leaked and sprayed his right hand, resulting in hospitalization due to liquid propane burns. PPE (gloves) were not worn at the time of the incident.
On September 2, 2025, at approximately 10:15 AM, an employee was setting a rest die in a press when the die slipped off the parallels. One of the employee's fingertips became caught in the die, resulting in a fingertip amputation.
On August 19, 2025, an employee was changing tooling on a sizing machine. The employee's left ring fingertip was pinched between the tooling and the machine and was partially amputated.
An employee was loading pipe into a flare machine when a part clamp caught her right hand. The hand was lacerated and broken. A light curtain was in place at the time of the incident.
A maintenance employee was working on the roof of a small office inside the facility. The employee fell through the ceiling and landed on the floor inside the office. The employee sustained fractured ribs and a punctured lung and was hospitalized.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.