NEILLSVILLE, WISCONSIN—
Mayville Engineering Company, Inc.
Struck by running powered equipment during maintenance, cleaning, testing · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Mayville Engineering Company, Inc., 1506 Industrial Park Dr., NEILLSVILLE, WISCONSIN 54456 on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
On August 19, 2025, an employee was changing tooling on a sizing machine. The employee's left ring fingertip was pinched between the tooling and the machine and was partially amputated.
More severe injuries at Mayville Engineering Company, Inc.
HEBER SPRINGS, ARKANSAS—
Mayville Engineering Company, Inc.
An employee was placing metal parts onto a stamp press when the press double-cycled and caught his right hand, resulting in crush injuries that required hospitalization and surgery.
BEDFORD, PENNSYLVANIA—
Mayville Engineering Company, Inc.
A maintenance employee was on the roof assisting with an air conditioning issue. The employee stepped backward and fell through a closed skylight and landed on the floor approximately 30 feet below. The employee sustained bruises.
HEBER SPRINGS, ARKANSAS—
Mayville Engineering Company, Inc.
An employee was running parts through a press brake. His left index fingertip was caught between a part and the machine's upper die. The fingertip was amputated.
GREENVILLE, MISSISSIPPI—
Mayville Engineering Company, Inc.
An employee was lifting a metal plate with a hoist when it fell, striking the employee's right ankle. The employee was hospitalized, requiring surgery and stitches.
MAYVILLE, WISCONSIN—
Mayville Engineering Company, Inc.
An employee was removing a 900-pound counterweight rigging to transfer it to a forklift when the counterweight fell to the ground during the transfer and landed on the employee's lower right leg. The employee sustained multiple fractures to the lower leg, requiring surgery and hospitalization.
View Mayville Engineering Company, Inc.'s full OSHA safety record →
Similar incidents · Same event type
ALACHUA, FLORIDA—
Envelope Seal Insulation, Inc
An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.
ADAIRSVILLE, GEORGIA—
CFL USA, LLC
A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.
TRENTON, GEORGIA—
Bull Moose Tube
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
AUGUSTA, GEORGIA—
US Battery Manufacturing Company, Inc
A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
More severe injuries in this industry (NAICS 332119)
URBANA, OHIO—
Rittal LLC
A forklift operator was switching out a propane tank on his forklift when the tank leaked and sprayed his right hand, resulting in hospitalization due to liquid propane burns. PPE (gloves) were not worn at the time of the incident.
MENTOR, OHIO—
Adams Technologies, Inc.
On September 2, 2025, at approximately 10:15 AM, an employee was setting a rest die in a press when the die slipped off the parallels. One of the employee's fingertips became caught in the die, resulting in a fingertip amputation.
DAYTON, OHIO—
AFC Stamping & Production, Inc
An employee was loading pipe into a flare machine when a part clamp caught her right hand. The hand was lacerated and broken. A light curtain was in place at the time of the incident.
COLUMBUS, OHIO—
The Buckeye Stamping Company
A maintenance employee was working on the roof of a small office inside the facility. The employee fell through the ceiling and landed on the floor inside the office. The employee sustained fractured ribs and a punctured lung and was hospitalized.
ELMIRA, NEW YORK—
Elmira Stamping & Manufacturing Co.
An employee was operating a stamp press when their hand was crushed in the machine. The employee was hospitalized with fractured bones and required surgery.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.